User manual TEAC TD0015A

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or groundingtype plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. [. . . ] Make sure to connect the white plug to the white jacks (Left) and the red plug to the red jacks (Right). C AC Power Cord Plug this AC power cord into an AC wall socket. 10 Parts of the Turntable A K B J I C D E F H G Before use, detach the stylus guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow. A turntable B screw fixing the turntable for transportation G Cassette tape operation button Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver. Side view of the screw for transport Play (y) Use this button to play a tape. Never press the Play button (y) and Rewind button (m) at the same time. H Cassette holder During transport (when shipped from the factory) During use When you transport the unit, turn the screw counterclockwise to secure the turntable. C cue-lever Use this lever to lift the tone arm. D tone arm holder E speed selector F tone arm Set a cassette tape with the exposed tape in front and the side to play facing up. I Tape Selecting switch When playing a normal tape (type I), set the Tape Selecting switch to "normal. " When playing a chrome tape (type II) or metal tape (type IV), set the switch to "high. " J Input Selecting switch When PHONO/TAPE is selected by pressing the corresponding button, use this switch to switch between "RECORD" and "TAPE. " When a record or cassette tape is playing, make sure to stop playing prior to using the switch. K 45 RPM adaptor 11 Unit Functions and Remote Control A BC D E F G H I S R QP O NM L K J I E T U V W X N J B O Y Q P F L 12 A POWER O REC LEVEL Press this button to turn the unit on or off. B PHONO/TAPE/AUX, FM/AM, CD In record pause mode, use this knob to adjust the recording level. P FINALIZE Press the PHONO/TAPE/AUX button and select PHONO to play a record. Press the PHONO/TAPE/AUX button and select AUX to listen to the external source connected to the AUX IN jacks. Press the CD button to play a CD. C Remote Sensor Use this button to finalize a CD-R/CD-RW disc. Q ERASE Use this button to erase or unfinalize a CD-RW disc. R TUNING When operating the remote control unit, point it towards the REMOTE SENSOR. D Display panel (frequency) In FM/AM mode, turn this knob to tune in a station. S PHONES When the unit is on, this display will light. E TRACK INCREMENT For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the VOLUME knob. The sound from speakers will be cut off while the headphones are plugged in. During recording, use this button to divide tracks. F RECORD T MANUAL/AUTO REC Use this button to enter record pause mode. G Display H TUNED indicator Use this button to select the mode of track number assignment. U PROGRAM In CD mode, use this button to program tracks. Lights when a station is correctly tuned in. I Speakers (stereo) W REPEAT V CLEAR In CD mode, use this button to clear programmed tracks. J CD operation buttons In CD mode, use this button to select a repeat mode of CD. X DISPLAY STOP (H) Use this button to stop playback or recording. PLAY (y) Use this button to start playback, recording, finalizing and erasing. PAUSE (J) Use this button to pause playback or recording. K OPEN/CLOSE In CD mode, use this button to change the display. Y SHUFFLE In CD mode, use this button for shuffle playback. In CD or PHONO/AUX mode, use this button to open and close the disc tray. < This button don't work in FM/AM mode. L VOLUME Note: To simplify explanations, instructions refer to names of buttons and controls on the front panel, making no mention of the use of remote control unit. Turn this knob to adjust the volume. M Disc Tray N MUSIC SKIP (. //) In CD mode, use these buttons to skip tracks. All the tracks of the disc will be played repeatedly. REPEAT 1 (Repeat one track) Press the REPEAT button twice during playback. If you press the MUSIC SKIP button and select another track, the track you selected will be played repeatedly. It is also possible to select a track to be repeated in the stop mode. Press the REPEAT button twice and then select the track number by pressing the MUSIC SKIP button. Press the PLAY button to start playback. < If one of the following buttons is pressed, shuffle mode will be cancelled: SHUFFLE in the stop mode, OPEN/CLOSE, POWER, FM/AM, PHONO/AUX < Shuffle playback works with finalized discs only. < If one of the following buttons is pressed, repeat mode will be cancelled: OPEN/CLOSE, POWER, FM/AM, PHONO/AUX < Repeat playback works with finalized discs only. 19 Programmed Playback Up to 32 tracks can be programmed in the desired order. < Insert a disc and select "CD" before beginning programming. < Programmed playback works with finalized discs only. 1 Press the PROGRAM button in the stop mode. 4 When the selection of track numbers has been finished, press the PLAY button (y) to start program playback. To check the programmed order In the stop mode, press the MUSIC SKIP button repeatedly to show the track numbers that have been stored in memory. "PROGRAM" indicator blinks, and "P-01" appears on the display. 2 Press the MUSIC SKIP button (. or /) to select a track. To add a track to the end of the program In the stop mode, press the PROGRAM button. Select a track number by pressing the MUSIC SKIP button, and then press the PROGRAM button. [. . . ] Make sure there is power to the AC outlet by plugging another item such as a lamp or fan. Relocate the unit further away from them, or turn the other appliances off. e Use the remote control unit within the (5m) range and pointed at the front panel. e Clear obstacles that are between the remote control unit and the main unit. [. . . ]