User manual TEAC TAPE1600
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TEAC TAPE1600. We hope that this TEAC TAPE1600 user guide will be useful to you.
Manual abstract: user guide TEAC TAPE1600
Detailed instructions for use are in the User's Guide.
[. . . ] Doing so may cause damage or operational failure and will void the warranty. Refer to this manual for installation, operation and maintenance procedures. [. . . ] When installing the Arcada tape backup software you will need the following: DOS: 386 or higher processor, 500 KB RAM minimum, 1. 7 MB free disk space, DOS 3. 1 or higher.
I
1
3. Remove the cover plate from the free bay OR remove an existing floppy drive. Currently, your floppy drives are connected to your floppy controller board with an existing cable as shown below:
Floppy Controller Card A Connector for
Windows: 386 or higher processor, 4 MB RAM minimum, 1. 7 MB free disk space, Windows 3. x, or Windows 95. NETWORK OPERATION The TEAC tape drive will backup and restore files on network drives and will restore files on local and network drives when running under NetWare @ (Versions 2. x and 3. x), LANtasticTM and Banyan VinesTM. Important files stored on a network server can easily be included in regular backups.
Eve A: E~$j$$PY (twisted end)
Fig. 4
Connehor for floppy drive B:
When installing your tape drive unit, you will connect the tape drive interface data cable as shown in the appropriate figure below.
HARDWARE INSTALLATION
Select a free drive bay and remove its cover plate OR remove an existing floppy drive so you can install the tape drive unit in its place. Unplug your computer, monitor and any other external peripherals.
Floppy Conk
Tape800/1600
Connector for flooov drive A:
Fern
Available 3 i/2"
Fig. 3
u Male
-4-
HARDWARE INSTALLATION GUIDE
HARDWARE INSTALLATION GUIDE (continued)
HARDWARE INSTALLATION
TAPE LOADING AND EJECTION
Tape Loading 1. Hold the tape with the label facing upward and the tape window facing the drive. Insert the tape into the tape drive slot keeping the tape as straight as possible while pushing the center of the tape until the tape cartridge snaps and locks into place.
6. Plug the tape drive interface data cable into the back of the tape drive as shown. Route the tape drive interface data cable through the drive bay opening and slide the tape drive unit into the drive bay. [. . . ] 3M
Tape800 Minicartridge Compatibility
Media Type: Format: Compressed 2:l Uncompressed: Tape Length: Brand Name: Travan TR-1 QIC-80 BOOMB 400MB 750 ft. 3M, Sony, Gigatek, Verbatim
TECHNICAL SUPPORT
Refer to the Arcada Software User Guide for technical correct technical support telephone number.
support and
the
@ 1996 TEAC America, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TEAC TAPE1600
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TEAC TAPE1600 will begin.