User manual TEAC T-R650

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. < Do not place any objects filled with liquids, such as vases, on the apparatus. < Do not install this apparatus in a confined space such as a book case or similar unit. [. . . ] The frequency changes by a fixed step (FM: 50 kHz steps, AM: 9 kHz steps). (on the front panel of the unit) < Use the TUNING button ( ) when using the remote control unit. Each time the TUNING MODE button is pressed, the tuning mode changes as follows: Manual tune FM < Manual tune > 108. 00MHz FM Mode Pressing the FM MODE button alternates between Stereo mode and Mono mode. 00MHz < If you do not operate within 4 seconds after pressing the MEMORY button, presetting will be cancelled. Up to 30 of the best received stations in your area will be stored automatically. 9 Preset Tuning 2 How to select preset stations (FM/AM) 1 Select AM or FM by pressing the BAND button repeatedly. (Up to 4 characters) When the FILE button is pressed, the assiggned name is displayed instead of the clock. Assigning the Names to the Preset Stations 1 Select a preset channel you want to assign the name in the “Preset tune“ mode. < Or you can assign the name to the current tuned station, and preset it into the memory. Press the TUNING MODE button repeatedly until “Preset tune” is displayed. 50MHz “----” appears, and the first “-” flashes on the display. ENGLISH 2 Press the or button to select the station you want to store. 6 Select a preset channel to store the station using the TUNING/SELECT knob. 00MHz < If you do not operate within 4 seconds after pressing the MEMORY button, presetting will be cancelled. Continue to next page q 11 Preset Tuning 2 (Remote Control) 4 Within 4 seconds, press the or button to select the Presetting Automatically 1 Select FM or AM by pressing the BAND button repeatedly. If the station currently selected is transmitting a traffic program signal, the RDS mode will be switched to PROGRAM SERVICE mode without searching for a traffic program. CT (CLOCK TIME) Displays the information about times provided from the station. When you select CLOCK TIME, “CLOCK TIME” will blink for about 3 seconds and then the clock time will be displayed. For instance, to select preset number 25, first press the TUNER button, and then press “2” and “5”. To select numbers less than 10, press “0” and then the number. As an example, to select number 5, press “0” and “5”. [. . . ] SL: 90 (80, 70 60, 50, 40, 30, 20 or 10) The power will be switched off 90 (80, 70, 60, 50, 40, 30, 20 or 10) minutes later. < If you want to check the remaining time, press the SLEEP button once. To turn off the timer Press the TIMER button repeatedly until “Timer Off” is displayed. 18 Troubleshooting If you experience any problems with the unit, please take a moment to look through this chart and see if you can solve the problem yourself before you call your dealer or a TEAC service centre. [. . . ]