User manual TEAC R-4INT

[. . . ] Z FM/Internet-radio with iPod Dock R-4iNT OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of electrical shock, fire, etc. : 1) Read these instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [. . . ] Select WPS on the wireless access point, and then press the SELECT button on the R-4iNT. > < If you want to return to the previous menu, press the BACK button. 12 Setting the Clock View settings Displays the current network settings. You can check the setting of following items: Active connection Wlan region SSID Subnet mask Primary DNS MAC address DHCP IP address Gateway address Secondary DNS If you set "Main menu" w "System settings" w "Time/Date" w "Auto update" to "No update", the clock need to be adjusted manually. 1 Press the CLOCK ADJ button. Wlan region Selects the region of the wireless LAN. When you select "Auto update" to "Update from Network", following menus appear. Daylight savings Select the daylight savings status "ON" or "OFF". Language Select the desired language for display menus from the following: English, Danish, Dutch, Finnish, French, German, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish < If the unit is set to a foreign language and you find it impossible to read the menu settings, you can restore all the factory default settings, and the menus will appear in English again (all other settings will be cleared). Factory Reset If you want to restart from a known set of options, restore the unit to the factory settings. < The unit completely erase all setting such as radio preset, WEP/ WPA codes and user setting. Software update Auto-check setting Selects software update automatically or manually. Info Displays the current software version and Radio ID. Set Time / Date 01 - 01 - 2009 00:00 The "day" value blinks. 2 / ) to set the current day, Press the Cursor botton ( and then press the SELECT button. Set Time / Date 04 - 01 - 2009 00:00 The "month" value blinks. < You can also use the MULTI JOG instead of the Cursor button ( / ). 3 Repeat step 2 to set "month", "year", "hour" and "minute". When "minute" is set, the clock starts. 13 Basic Operation This chapter describes the basic operation which is available in every mode. 3 Play the source, and adjust the volume using the Volume button ( or ). 1 Press the Standby/On button ( ) to turn the unit on. < The unit turns on with the source that was last selected. The volume can be adjusted from Muted (00) to Max (20). To reduce or turn up the volume continuously, hold down the Volume button ( or ). ) to put the unit in the < Press the Standby/On button ( standby mode when it is not being used. 2 Press the MODE button repeatedly to select a source. Dimmer You can change the brightness of the display. The selected source is shown on the display. Each time the MODE button is pressed, the source changes as follows: Internet radio Music player Pandora FM radio iPod Aux in < You can also use the FUNCTION buttons ( / ¥) on the remote control unit to select a source. Use the DIMMER button ( levels. ) to set the brightness one of three Full brightness Medium brightness Minimum brightness < Setting is cancelled if the Standby/On button ( ) is pressed. Muting You can mute the sound temporarily. To mute the sound, press the Muting button ( ). < The Muting indicator ( ) appears on the display while muting is engaged. < If you change the volume when the sound is muted, it will be unmuted. 14 Equalizer You can adjust the sound according to the genre of music or your taste. My EQ profile setup Bass: 0 Treble: 0 Loudness: Off 1 Press the EQ button to enter the equalizer mode. 2 Press the Cursor botton ( / ) to select a item. Equalizer Normal Flat Jazz Rock Movie When you want to adjust "Bass" or "Treble". Press the SELECT button. 2 / ) to select a preset Press the Cursor botton ( equalizer and then press the SELECT button. / Press the Cursor button ( ) to adjust the value of the selected item, and then press the SELECT button. < The current setting is marked with a " Normal Flat Jazz Rock Movie Classic Pop News My EQ Equalizer is off. Press the SELECT button to change "On" and "Off". 3 Press the EQ button. My EQ profile setup Set the equalizer by yourself (see below). "Save changes?" appears on the display. Setting the equalizer by yourself When you select "My EQ" in the equalizer mode, set the profile of "My EQ" as follows: 4 Press the SELECT button to select "YES". 1 Select "My EQ profile setup" in the equalizer mode (see above), and then press the SELECT button. Your customized equalizer is saved to "My EQ". < If you want to cancel, Press the Cursor button ( "NO", and then press the SELECT button. / ) to select 15 AUX in Listening to an External Source In addition to connecting other audio devices, you can use the AUDIO IN to listen to an iPod that has no dock connector or when an appropriate Dock adapter is not available. 3 Play the source, and adjust the volume using the Volume button ( or ) of the R-4iNT and of the audio player. 1 Connect the PHONES jack or audio output jack of a portable audio player to the AUDIO IN jack of the R-4iNT using the supplied stereo mini-plug cable. AUDIO IN < When using the headphones jack of a device, if you do not adjust its volume, you might not hear any sound from the R-4iNT. [. . . ] e Use remote control unit within the range (16 ft/5 m) and point at the front panel. e Make sure the line cords and speaker cables are as far away from the AC supply as possible. Pandora Cannot connect to the Internet. e Check if your computer can connect to the Internet using the same network. The unit needs access to the following UDP and TCP ports as a minimum: 80, 554, 1755, 5000 and 7070. [. . . ]