User manual TEAC PMHP10

[. . . ] SPECIFICATION MICROPHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 26 26 27 28 29 30 30 32 32 34 36 37 38 39 40 40 40 41 25 | PowerMax-HP10 CE DECLARATION We declare the product PowerMax-HP/PowerMax-HP10M complies with the following standards and directives: EMC Directive 89/336/EEC LVD Directive 73/23/EEC EN 55022/1998 EN 60000-3-2/-3-3 EN 55024/1998 EN 60000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 EN 60950 CONTENT OF PACKAGE PowerMax-HP10 existing of 5. 1 channel amplifier 6 channel 5. 1 headphone In-line controller Power adapter PC connecting cable AMP connecting cable DVD connecting cable TV connecting cable USB connecting cable Microphone and microphone cable Adapter cable FEATURES The 5. 1 surround sound headphone system incorporates a home theatre 5. 1 channel amplifier with 6 independent amplified sound channels. The independence enables to perform different sounds that together achieve perfect home theater leisure enjoyment. [. . . ] Connect the 7. 5V DC power supply to the 7. 5V DC input jack on the back of the 5. 1 amplifier box. CD devices can be connected to the input AUX with the PC connecting cable. For power and signal connection method, please refer to the picture below. CD PC connecting cable (A) 7. 5V DC Power Supply Back plate PowerMax-HP10 36 | PowerMax-HP10 4. Connecting VCD player devices An external DC power supply is required. Connect the 7. 5V DC power supply to the 7. 5V DC input jack on the back of the 5. 1 amplifier box. Optionally a stereo amplifier/speaker system can be connected to the pass-through 5. 1 front output connectors of the headphone amplifier. For power and signal connection method, please refer to the picture below. VCD output TV connencting cable (D) Stereo amplifier connencting cable 7. 5V DC Power adapter Back plate PowerMax-HP10 37 | PowerMax-HP10 5. Connecting Computers (Stereo Sound Cards) Utilize an USB cable for power source. Connect the USB 5V power source to the jack USB1 on the back of the 5. 1 amplifier box. The second USB connector USB2 can extend the occupied USB connector of your computer for other USB devices. with Notebooks) disconnect the USB cable and install the external power supply. PC stereo sound cards can be connected to the input AUX of the amplifier box by a PC audio cable with 3. 5mm mini phono plugs at both ends. Optionally a stereo amplifier/speaker system can be connected to the pass-through 5. 1 front output connectors of the headphone amplifier. For power and signal connection method, please refer to the picture below. PC stereo sound card USB cable (E) stereo speaker Back plate PowerMax-HP10 38 | PowerMax-HP10 6. Connecting Computers (Stereo Sound Cards) Utilize an USB cable for power source. Connect the USB 5V power source to the jack USB1 on the back of the 5. 1 amplifier box. The second USB connector USB2 can replace the occupied USB connector of your computer for other USB devices. with Notebooks) disconnect the USB cable and install the external power supply. PC stereo sound cards can be connected to the input AUX of the amplifier box by a PC audio cable with 3. 5mm mini phono plugs at both ends. Optionally a 5. 1 amplifier/speaker system can be connected to the pass-through 5. 1 front output connectors of the headphone amplifier. For power and signal connection method, please refer to the picture below. PC stereo sound card USB cable (E) 5. 1 channel speaker Back plate PowerMax-HP10 39 | PowerMax-HP10 SPECIFICATION 5. 1-CHANNELS AMPLIFIER DVD, PC, VCD, CD, TV, MP3, CD-R, CD-DA AUX (Stereo) 1 Set DVD (5. 1-channel) 1 Set Audio Outputs 6 Channels 1 Set Audio Specifications Front, Rear, Center. 20Hz-20kHz Subwoofer 20Hz-120Hz Signal/Noise ratio >=80dB Selection >-60dB Distortion <0. 5% Power supply AC/DC power supply 230/7. 5V, 500mA, 3. 75W USB power 5. 0V, 500mA, 2. 5W Dimensions (W x D x H) 90 x 155 x 143 mm Weight amplifier approx. [. . . ] Please ensure to fill out the warranty certificate correctly (do not forget the serial number of the product). TEAC reserves the right to refuse the guarantee service if the documents are missing or incomplete in the understanding of this terms. If the necessary repairs are covered by the warranty, and if you have sent the product or parts of it to the nearest authorized service station, the return freight and insurance charges will be prepaid. Please do not return your unit to the TEAC factory without our prior authorization (see also RMA form)! [. . . ]