User manual TEAC PICO4

[. . . ] ® CD Copy Station Pico-4 User's manual To ensure the smooth handling of your warranty please write the serial number of your device into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. · Changes in specifications and features may be made without notice or obligation. · · Copyright © 2002, TEAC Deutschland GmbH. First edition: March 2002 Company and product names provided herein are trademarks of their respective companies. CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMPORTANT SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] While the copy operation is in progress, make sure that the Pico-4 is not subjected to vibration or mechanical shocks. 3. Modes 43 ENGLISH 1. Press the MODE key until the display appears as below (the 8x may also read 4x or 2x, and indicates the speed at which the copy will be made ­ see 3. 6 , , Setting the Writing Speed" below). Copy : 8X Ready ? 3. Place the source disc in the MASTER disc tray, and a blank CD-R respectively CD-RW disc in the SLAVE disc tray. If you decide that you do not want to make a copy at this stage, press the MODE key to return to the mode selection menu. If the trays are not closed the error message , , Error, ## TRAY Open ## is shown. Close ##" Error, the trays and continue by pressing the keys MODE or ENTER. The Pico-4 will read the master CD and it checks the CD-Rs respectively the CD-RWs inserted in the slave drives (Checking Media, Cheching Data). If a CD-RW is inserted into one of the slave drives to which was written before the following message appears: CD-RW in driveN Erase disk?If you will not overwrite the CD-RW you have to cancel the copying process for this CD-RW with the MODE key. 4. 44 3. Modes If you press ENTER, you will see the following message: Erasing CD-RW disk The copying will be resumed after approx. If the Pico-4 does not detect any potential problems with the discs it will write the TOC information onto the slave CDs. The screen contains the following message during this process: Writing TOC 5. The percentage which has been written is shown on the display, along with an animated display to indicate that writing is currently in progress: Writing 7% This operation may take a minute or more, depending on the complexity of the disc. When the finalization operation is complete, the display will show: Copy Complete The trays are opened automatically. You can now remove the discs using the eject buttons on the drives (these are disabled while the copy process is taking place). If one or more of the CD-RW(s) is/are skipped, the corresponding drive N is shown with this message: Copy complete, Err at [N]. Modes 45 ENGLISH 3. 2 Test Write Mode The test operation is functionally similar to the write operation, except that the writing of data to the slave disc is simulated. This is useful to make sure that data can be transferred at the selected rate between the master and the slave discs. Press the MODE key until the display shows: Mode select 2 Test write: 8X 2. Insert the disc into the disc tray (original in the MASTER, and the blank CD-Rs/CD-RWs in the SLAVE drives) and press the ENTER key. The test operation continues in exactly the same way as the copy operation described above. If a CD-RW is inserted into one of the slave drives to which was written before the following message appears: CD-RW in driveN Continue? [. . . ] Die TEAC Tochtergesellschaften, die autorisierten TEAC Servicestellen und die autorisierten Servicestellen der Facheinzelhändler übernehmen die Garantieleistung in den anderen EG- und EFTA-Mitgliedsstaaten im Rahmen der in dieser Garantie definierten Bestimmungen. Gewährleistungsumfang Soweit dies nachfolgend nicht ausgeschlossen wird, umfaßt die Gewährleistung alle etwaigen Defekte an Material und Herstellung. Folgendes ist aus dem Gewährleistungsumfang ausdrücklich ausgeschlossen: 1. Geräte, die verändert wurden oder deren Seriennummern verfälscht, verändert oder entfernt wurden. [. . . ]