User manual TEAC PD-H300MKIII

[. . . ] 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction. < Do not use CDs with an irregular shape (octagonal, heart shaped, business card size, etc. CDs of this sort can damage the unit: (Compact discs can be played or recorded only on one side. ) < To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. < If you are in any doubt as to the care and handling of a CDR/CD-RW disc, read the precautions supplied with the disc, or contact the disc manufacturer directly. This unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc. < When more than 255 files (including folders) are recorded on the disc, or when more than 128 folders are recorded on the disc, the unit might not be able to play it correctly. < When a MP3 disc is loaded, it may take several minutes until the unit can start to play depending on the numbers of recorded files or the complexity of the folder tree. < Should the disc become dirty, wipe the surface radially (from the center hole outward towards the outer edge) with a soft, dry cloth: < Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. such chemicals will do irreparable damage to the disc's plastic surface. < Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to "skip. Playing such discs may cause irreparable harm to the playing mechanisms. < CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location where direct sunlight will fall on them, and away from sources of heat such as radiators or heat-generating electrical devices. CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. Connect this jack to the CD input jack of the amplifier with an RCA cable. Make sure to connect : white plug q white jack (L: left channel) red plug q red jack (R: right channel) < Keep the supplied cap to cover the terminal when it is not in use. If you have TEAC A-H300mkIII, convenient system control operations are available: · You can use the system remote control unit RC-957 (provided with A-H300mkIII) to operate this unit. If you use the provided remote control unit RC-1039 instead of the system remote control connection, turn this switch to SINGLE. [. . . ] When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. ENGLISH If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. [. . . ]