User manual TEAC PCD0010A

[. . . ] 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. [. . . ] This allows further tracks to be recorded to the disc, provided that there is space on the disc. < Repeat, shuffle and programmed playback don't work with unfinalized (NO TOC) discs. Make sure that the batteries are inserted with their positive "+" and negative "_" poles positioned correctly. Recordable discs In this manual, we use the term "recordable" disc to describe a CD-R or CD-RW disc that has not been finalized, and has enough space to record. Battery Replacement If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. Precautions concerning batteries < Be sure to insert the batteries with correct positive "+" and negative "_" polarities. < When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones. < Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire. How to open/close the turntable cover Be careful not to damage the drive belt when assembling the turntable. < When turning on the power to the unit, the tone arm may move if the cum was subjected to shock during transportation and has been displaced. If the tone arm does not automatically return to the tone arm rest, pull the STOP lever. AM broadcast Turn around the unit to find the best position for AM stations. FM broadcast Extend and turn around the FM antenna so that you can receive the stations clearly. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. Wait until the total number of the tracks and the total play time of the disc are displayed. Total number of the tracks total play time of the disc CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW NO TOC CD-R: A CD-R which has yet to be finalized NO TOC CD-RW: A CD-RW which has yet to be finalized blank: No disc or unreadable disc Disc playback starts from the first track, and the PLAY indicator (y) lights on the display. < If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts. C To skip to the next or a previous track Each time the DISPLAY button is pressed, the display changes as follows: Or/) until the desired track is found. Or/ ) repeatedly until the track you want to listen to is found, and press the PLAY button (y) to start playback from the selected track. Button is pressed during playback, the track being played will be played from the beginning. [. . . ] Remember that it is not possible to perform any erase or unfinalize procedures on a CD-R disc. "Er" and the last track number appear when the disc hasn't been finalized. Each time the ERASE button is pressed, the display changes as follows: "Er" and the number of the last track recorded on the disc Select this to erase the last track on the disc. < This will not appear when only one track is recorded on the disc. [. . . ]