User manual TEAC NPH750 B

[. . . ] Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance will void the user’s warranty. NOTE For product available in the USA/Canada market, only channels 1 to 11 can be operated. [. . . ] In order to comply with this regulation, the automatic power saving function of this unit is set to 30 minutes when shipped new, so the unit will automatically enter standby if 30 minutes pass under the conditions shown in the following table. However, when “On” is selected for the network standby setting (page 37), this function is not active. ) ppWhen you turn on the unit, the selected source is the one selected before the unit was put into standby. PpDuring playback in iPod mode, if you put the unit into standby by pressing the STANDBY/ON button, the next time the power is turned on again, the unit will be in iPod mode and playback will start automatically when an iPod/iPhone/iPad is connected. Listening files on a USB flash drive (1) You can play audio files stored on a USB flash drive by connecting it to this unit. 1 Press the SOURCE button repeatedly to select “USB/iPod”. ENGLISH ppYou can also use the USB/iPod button to select this directly. pp“Not Connected” will be displayed if no USB flash drive is connected. Status No connection Stopped/ paused No input signal AirPlay, iPod/ iPhone/ iPad  * - USB flash drive Media player Internet   - External input   -  2 Connect a USB flash drive to the unit. σ External input:  SB Audio In, COAXIAL, OPTICAL, PHONO, U AUX 1/2  Automatic power saving function active - Automatic power saving function not active * Compatible only with AirPlay / Not applicable 3 Select the file you want to play. 4 Press the play/pause button (y /9 ) or ENTER button to start playback. PpIf you press the / button when a file is displayed, playback will also start. Indb 27 12/11/16 15:37 Listening files on a USB flash drive (2) Stopping playback Skipping to the next or previous track/file Press the stop button (H) to stop playback. Button is pressed during playback, the track/file being played will be played from the beginning. PpWhen playing tracks on a USB flash drive, skipping to the next track from the last track will stop playback. Press the play/pause button (y/J) to pause playback at the current position. Indb 28 12/11/16 15:37 Searching inside folders You can search for and select tracks by name within folders on a USB flash drive and play them back. If double-byte characters, such as Japanese kana, are used in a file name, this unit cannot show them correctly, so accurate searching will not be possible. 1 Press the scroll buttons (k/j) to select the folder you want to listen to the track within. PpWhen viewing a folder, press the skip (/) button to move to the next folder. PpWhen a file is selected, press the skip (/|) button to start playback of the track. Or ppMP3/WMA files that are not inside folders will be shown after the folders in order. [. . . ] The unit needs access to the following UDP and TCP ports at least: 80, 554, 1755, 5000 and 7070. E Check if your computer can connect to the Internet using the same network. Set up the computer not to shut down or enter sleep mode automatically. (Shared Media) e Add the track to the media library of Windows Media Player. [. . . ]