User manual TEAC LP-U200

[. . . ] Please record the model number and serial number and retain them for your records. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord. The high-performance AM loop antenna provided with this unit is sufficient for good reception in most areas. While in FM mode, tune in an FM station and extend the lead to find the best position for the reception. This antenna may need to be repositioned if you move your unit to a new location. FM Outdoor Antenna In an area where FM signals are weak, it will be necessary to use an outdoor FM antenna. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements. To reduce unwanted noise, outdoor antenna will be required or record it with the FM mode switched to MONO. Make sure to connect the white plug to the white jacks (Left) and the red plug to the red jacks (Right). < To cancel the menu setting mode, leave the unit idle for a minute, or press the STOP button (H). Hold down the TUNING button ( or °) until the frequency display begins to change. When the TUNING button ( or °) is pressed momentarily, the frequency changes by a fixed step. Press the TUNING button ( or °) repeatedly until the station you want to listen to is found. STEREO FM stereo broadcasts are received in stereo and the "STEREO" indicator lights in the display. < If the sound is distorted and the "STEREO" indicator flashes, the signal is not strong enough for good stereo reception. To reduce uwanted noise, outdoor antenna will be required or record it with the FM mode switched to MONO. You can store FM and AM stations into preset channels 1 to 9 respectively. < Preset channels can also be selected using the numeric buttons of the remote control unit. < Before use, completely loosen the transportation screw by turning them clockwise with a coin and remove the stylus guard. When playing a 45 RPM large hole single record, use the included adaptor. 5 Gently push the clamper to the right to release the tone Be careful not to pinch your finger. When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. [. . . ] < To cancel the timer setting mode, leave the unit idle for a minute, or press the STOP button (H). If you want to set the recording volume, set the rec level during normal recording. < When the source is set to "TUNER" and the unit turns on, it will tune in to the station you selected last time. You can set the time to turn this unit off after the playback finished. [. . . ]