User manual TEAC GF-450K7

[. . . ] CEC6P10501630 Z CD recorder with turntable/cassette player OWNER'S MANUAL GF-450K7 IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read these instructions. [. . . ] PAUSE (J) Use this button to pause playback or recording. K OPEN/CLOSE In CD mode, use this button to change the display. Y SHUFFLE In CD mode, use this button for shuffle playback. In CD or PHONO/AUX mode, use this button to open and close the disc tray. < This button don't work in FM/AM mode. L VOLUME Note: To simplify explanations, instructions refer to names of buttons and controls on the front panel, making no mention of the use of remote control unit. Turn this knob to adjust the volume. M Disc Tray N MUSIC SKIP (. //) In CD mode, use these buttons to skip tracks. Hold down these buttons to search for a part of a track. 13 Basic Operation 2 Listening to the Radio 1 1 3 2 1 Press the POWER switch to turn the unit on. 1 Select FM or AM using the FM/AM button. 2 Select a source by pressing the corresponding button. 2 Turn the TUNING knob to tune in a station. < To listen to an external source connected to AUX jacks, select AUX by pressing the PHONO/AUX button once or twice. When PHONO/TAPE is selected, set the Input Selecting switch by the turntable to "RECORD" or "TAPE. " < The TUNED indicator lights when a station is correctly tuned in. < The STEREO indicator lights when an FM stereo broadcast is tuned in. 3 Play the source, and adjust the volume by turning the VOLUME knob. If the reception is poor AM broadcast Turn around the unit to find the best position for AM stations. FM broadcast Extend and turn around the FM antenna so that you can receive the stations clearly. 14 Listening to a Record 1 1 2 adaptor 4 transportation screw 7 3 6 5 < Before use, completely loosen the transportation screw by turning them clockwise with a coin and remove the stylus guard. 4 Put the record on the turntable. When playing a 45 RPM large hole single record, use the included adaptor. 1 Press the PHONO/TAPE/AUX button once or twice to select 5 Select the speed. PHONO/TAPE. 2 Gently open the dust cover. Be careful not to pinch your finger. 6 Gently push the clamper to the right to release the tone arm. clamper 7 Raise the cue lever to lift the tone arm off the tone arm support. 3 Set the Input Selecting switch to RECORD. tone arm cue lever 15 Listening to a Record 2 When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. 9 To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. 8 tone arm 8 Move the tone arm gently to the edge of the record (or the starting point of a track). cue lever 9 Gently lower the tone arm by slowly releasing the cue lever. You can lower the tone arm manually if the cue lever has not been raised. cue lever < Playing records with the dust cover down will prevent dust from settling on the turntable. < Do not place anything on top of the turntable cover, especially while playing a record. 16 Listening to a CD 1 1 5 3 24 1 Press the CD button. 4 Press the OPEN/CLOSE button (L) to close the tray. "--" blinks for a few seconds. When no disc is set, "nOdISC" appears on the display. < It takes a few seconds for the unit to load the disc. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator 2 Press the OPEN/CLOSE button (L). total number of the tracks 3 Place a disc on the tray with the printed label face up. total play time of the disc < The disc type indicator shows the type of disc currently loaded. CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW NO TOC CD-R: A CD-R which has yet to be finalized NO TOC CD-RW: A CD-RW which has yet to be finalized blank: Unreadable disc < When a non-music CD is inserted, its contents may be detected and playback may start. However, no sound is generated. 5 Press the PLAY button (y) to start playback. < Never place more than one disc on the tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. Disc playback starts from the first track, and the PLAY indicator (y) lights on the display. < If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts. 17 Listening to a CD 2 AB Time Display CD A To suspend playback temporarily (pause mode) Each time the DISPLAY button is pressed, the display changes as follows: CD/CD-R/CD-RW playback Press the PAUSE button (J) during playback. To resume playback, press the PLAY button (y) or the PAUSE button (J). elapsed time of current track B To stop playback time remaining for current track Press the STOP button (H) to stop playback. total elapsed time of the disc C To skip to the next or a previous track time remaining for the disc During recording During playback, repeatedly press the SKIP button (. or/) until the desired track is found. or/ ) repeatedly until the track you want to listen to is found, and press the PLAY button (y) to start playback from the selected track. button is pressed during playback, the track being played will be played from the beginning. button twice. elapsed recording time of the track remaining recording time of the disc In record pause mode D Search for a part of a track total number of the tracks total play time of the disc During playback, hold down the SKIP button (. or/) and release it when the part you want to listen to is found. remaining recording time of the disc 18 Repeat Playback Shuffle Playback Each time the REPEAT button is pressed, the repeat mode is changed as follows: REPEAT ALL (off ) REPEAT 1 The tracks can be played randomly. (In the stop mode, press the SHUFFLE button and the PLAY button. ) When the shuffle playback of all the tracks has been finished, the unit stops and the shuffle playback mode is cancelled. [. . . ] e If a strong light is near the unit, turn it off. Cassette tape The unit does not work even after operation buttons are pressed. If normal operation cannot be obtained, unplug the power cord from the outlet and plug it again. CD Recorder Will not play. e This unit cannot record CD-R or CD-RW discs designed for computer systems. Use a disc bearing the "DIGITAL AUDIO" mark. Beware of condensation When the unit (or a record/disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is the danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation erratic or impossible. [. . . ]