User manual TEAC GF-350

[. . . ] CEC6P10501060-D Z GF-350 Multi music player / CD recorder OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] FM broadcast Extend and turn around the FM antenna so that you can receive the stations clearly. 12 Listening to a Record 1 3 1 2 transportation screw 6 5 4 adaptor < Before use, completely loosen the transportation screw by turning them clockwise with a coin and remove the stylus guard. 3 Put the record on the turntable. When playing a 45 RPM record, use the included adaptor. 4 Select the speed. 1 Press the PHONO/AUX button once or twice to select PHONO. 5 Gently push the clamper to the right to release the tone arm. 2 Gently open the dust cover. clamper Be careful not to pinch your finger. 6 Raise the cue lever to lift the tone arm off the tone arm support. tone arm cue lever 13 Listening to a Record 2 When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. 8 tone arm 7 7 Move the tone arm gently to the edge of the record (or cue lever the starting point of a track). The turntable will begin to turn. 8 Gently lower the tone arm by slowly releasing the cue lever. You can lower the tone arm manually if the cue lever has not been raised. cue lever < Playing records with the dust cover down will prevent dust from settling on the turntable. Please do not place anything on top of the turntable cover, especially while playing a record. 14 Listening to a CD 1 1 5 3 24 1 Press the CD button. 4 Press the OPEN/CLOSE button (L) to close the tray. "--" blinks for a few seconds. When no disc is set, "nOdISC" appears on the display. < It takes a few seconds for the unit to load the disc. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator 2 Press the OPEN/CLOSE button (L). total number of the tracks 3 Place a disc on the tray with the printed label face up. total play time of the disc < The disc type indicator shows the type of disc currently loaded. CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW NO TOC CD-R: A CD-R which has yet to be finalized NO TOC CD-RW: A CD-RW which has yet to be finalized blank: No disc or unreadable disc 5 Press the PLAY button (y) to start playback. < Never place more than one disc on the tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. Disc playback starts from the first track, and the PLAY indicator (y) lights on the display. < If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts. 15 Listening to a CD 2 A B Time Display CD A To suspend playback temporarily (pause mode) Each time the DISPLAY button is pressed, the display changes as follows: CD/CD-R/CD-RW playback Press the PAUSE button (J) during playback. To resume playback, press the PLAY button (y) or the PAUSE button (J). elapsed time of current track B To stop playback time remaining for current track Press the STOP button (H) to stop playback. total elapsed time of the disc C To skip to the next or a previous track time remaining for the disc During recording During playback, repeatedly press the SKIP button (. or/) until the desired track is found. or/ ) repeatedly until the track you want to listen to is found, and press the PLAY button (y) to start playback from the selected track. button is pressed during playback, the track being played will be played from the beginning. button twice. elapsed recording time of the track remaining recording time of the disc In record pause mode D Search for a part of a track total number of the tracks total play time of the disc During playback, hold down the SKIP button (. or/) and release it when the part you want to listen to is found. remaining recording time of the disc 16 Repeat Playback Shuffle Playback Each time the REPEAT button is pressed, the repeat mode is changed as follows: REPEAT ALL (off) REPEAT 1 The tracks can be played randomly. (In the stop mode, press the SHUFFLE button and the PLAY button. ) When the shuffle playback of all the tracks has been finished, the unit stops and the shuffle playback mode is cancelled. < If you press the / button during shuffle playback, next track will be randomly selected and played. < If one of the following buttons is pressed, shuffle mode will be cancelled: SHUFFLE in the stop mode, OPEN/CLOSE, POWER, FM/AM, PHONO/AUX < Shuffle playback works with finalized discs only. REPEAT ALL (Repeat All the Tracks) Press the REPEAT button once during playback. REPEAT 1 (Repeat one track) Press the REPEAT button twice during playback. If you press the MUSIC SKIP button and select another track, the track you selected will be played repeatedly. It is also possible to select a track to be repeated in the stop mode. [. . . ] To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. The unit will stabilize at the temperature of its surroundings. Maintenance Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. [. . . ]