User manual TEAC DVD DUPLI

[. . . ] ® DVD Dupli 14/4 DVD Dupli 7/4 DVD Dupli 4/4 CD-R Dupli 14/40 CD-R Dupli 7/40 CD-R Dupli 4/40 DVD and CD-R CopyStation User's manual To ensure the smooth handling of your warranty please write the serial number of your device into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. · Changes in specifications and features may be made without notice or obligation. · · Copyright © 2003, TEAC Corporation. First edition: March 2003 Company and product names provided herein are trademarks of their respective companies. CONTENTS 1. GENERAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] At this moment, you can switch to another partition that contains data, or use function 9 Image to load the data into the chosen partition first. 86 4. Functions 4. 9 Image ENGLISH Function 9. Image is valid only when you have installed an optional hard disk. They are Load, Delete Image, Image Info, Compare Image, Select Partition and Select Src Drive. Select function 9. 9. Image 4. 9. 1 Load On the above figure press ENT, and you will enter the following figure. Here the function Load is to let you load data from the source drive or any one of the Writers into the current partition of the optional hard disk. 9-01. Image Load P:A means partition A. P: A Press ENT to load. LCD will show the loading information as follows. Load- A - DVD 0% 4213. 4MB d:20:15 4. Functions 87 After the image file is successfully loaded, LCD will show the results as follows. ENGLISH Image load OK If there is an image file existing in the current partition, the system will ask you whether to overwrite it or not. Please use V W to confirm Yes or No. Image Exists Overwrite?Yes 4. 9. 2 Delete Image If you want to empty an image file stored in a particular partition, you can use the function Delete Image to do so. Image P: A Delete Image The system will ask if you are sure to delete. Use V W to confirm Yes or No. Delete Image in Partition A?Yes 88 4. Functions After the image file is deleted, LCD will show the results as follows. Partition A: Image is deleted 4. 9. 3 Image Info This function is to show the basic information of an image file stored in a particular partition of the optional hard disk. First, select the function by pressing W. 9-03. Image Image Info P: A Press ENT, and LCD will show the information of the image file as follows. Disc Type: DVD-ROM Capacity: 4213. 4MB 4. 9. 4 Compare Image This function is to compare the contents of the source DVD/CD and those of the image file in the partition. Functions 89 ENGLISH Press ENT, and LCD will show the comparison information as follows. ENGLISH Compare- DVD 0% 4213. 4MB 1:05:06 When comparison comes to an end, LCD will show the results as follows. Compare Fail: 0 OK: 1 Diff: 0 Press ENT to see the details of source 1 as shown below. Src: 01 Total: DVD-ROM 4213. 4MB Press ENT to see the details of source 2. If the comparison is identical, LCD will show the message as follows. Tgt: 00 HDD Identical P: A If comparison fails, LCD will show the failure. By pressing ENT twice, LCD will show that the contents of source 1 (SRC: 01) and those of source 2 (Tgt: 00) do not match as follows. Tgt: 00 HDD P: A TOC not match 90 4. Functions 4. 9. 5 Select Partition 9-05. Image P: A Select Partition Each partition will occupy 5GB. The number of partitions is dependent on the optional hard disk's capacity. Now select a working partition by pressing V W, and LCD will show the message as follows. Select Working Partition - A After the partition is selected, LCD will show the results as follows. Set Partition to A 4. 9. 6 Select Src Drive This function is to select the source drive or any of the DVD/CD Writers as the source from which you can load data into a particular partition as an image file. 4. Functions 91 ENGLISH This function is to select a partition in the optional hard disk. First, select the function by pressing W. First, select the function by pressing W. ENGLISH 9-06. Image P: A Image Src Drive Then, use V W to select source drive or any of the DVD/CD writers as the source. Select Img Src: 01 IDE1 DVD-ROM After selecting the source such as DVD-ROM, you can press ENT, and LCD will show the message as follows. Load image from Drive ID-01 4. 10 Edit Track Function 10. Edit Track is exclusively designed for editing a collection of favorite songs from CDs. In other words, it can collect different tracks (songs) on a number of CDs and merge them into a single CD. [. . . ] Troubleshooting 123 ENGLISH 5. 4 About Buttons ENGLISH If you press any one of the four buttons on the panel, but there is no response, it is likely that the button cannot function well. Please inspect the jumper setting. 5. 5 About DVD/CD Disc Not Readable After copying if the DVD/CD disc is not readable, please use Compare to examine, or get another source drive to test. 5. 6 About High Failure Rate If the failure rate of copying is high, please do the following things to improve. If the speed is over 24X, copy the data to the optional hard disk first, and then transmit to DVD/CD. 5. 7 About Function 12 and Cancellation If you want to execute function 12. Advanced Setup, you can press ESC for 2 seconds. And during operation if you want to cancel a function like Copy, Test, Verify and so on, you can press ESC for 2 seconds, too. 124 5. [. . . ]