User manual TEAC DV516E

[. . . ] reserves the right to modify product offerings or specifications without advance notice. No part of this publication may be reproduced in any format without the express written permission of TEAC America, Inc. IBM and PC are registered trademarks of International Business Machines Corporation. Windows, Windows 95, Windows 98, Windows Me, Windows 2000, and MS-DOS are trademarks or registered trademarks of Microsoft Corporation. [. . . ] The system displays the System Properties panel (Figure 5). 3. Click the Device Manager tab on the System Properties panel. The system displays the Device Manager (Figure 5). socket items recognized by the system Figure 5. System Properties Panel TEAC PortaDVD User's Manual 7 4. Double-click the item PCMCIA Socket on the Device Manager listing. The Device Manager displays the PCMCIA Socket items currently recognized by the system (see Figure 5 on page 7). If an "x" or "!" mark appears on an item, it is not currently recognized by the system. In this case, you must install the PCMCIA driver using the PCMCIA Card Wizard. (See "Installing the PCMCIA Card Using the Windows PC Card Wizard" on page 9. ) If the TEAC PCMCIA/IDE card is recognized by the system, proceed to "Installing the PortaDVD Driver Using the Windows Wizard" on page 11. Note: If the PCMCIA Card icon does not appear in the Control Panel, try double-clicking the Add New Hardware icon and instruct the Wizard to search for new hardware. 8 TEAC PortaDVD User's Manual Installing the PCMCIA Card Using the Windows PC Card Wizard Follow the steps below to install the PCMCIA driver using the PC Card Wizard. To do so, click the Start button, and select Settings-->Control Panel from the pop-up menu. The system displays the Welcome to the PC Card (PCMCIA) Wizard panel. Figure 6. Welcome to PC Card Wizard Follow the instructions on the PC Card Wizard panels to complete the installation. Note: The system configuration and your dialog responses determine which panels the Wizard displays. Do not be concerned if your installation process varies slightly from the one described below. PC Card Wizard TEAC PortaDVD User's Manual 9 4. Click the Next button. System Settings Change 6. Click the Yes button to shut down the computer. The system shuts down the computer. 7. Power on the computer. 10 TEAC PortaDVD User's Manual Installing the PortaDVD Driver Using the Windows Wizard The following sections explain how to install the PCMCIA driver using the Windows Add New Hardware Wizard. For Windows 98/Me/2000 The installation procedure for the PCMCIA Card Driver varies depending on the version of Windows 98/Me/2000 installed in your computer. To install the driver on a Windows 98/Me/2000 system, follow these steps: 1. Insert the PCMCIA card into the PCMCIA card slot in your laptop computer. The other end of the card/cable should already be connected to the interface connector on the PortaDVD. (For more information, see "Connecting the PortaDVD" on page 6. ) The system displays the initial Add New Hardware Wizard panel. Figure 10. Add New Hardware Wizard Note: The panels the Wizard displays are determined by your system configuration and your responses to the dialog. Do not be concerned if your installation process varies slightly from the one described. [. . . ] Extending the Disc Tray 18 TEAC PortaDVD User's Manual 2. Insert a DVD, CD-ROM or audio CD into the drive. Press the disc gently down onto the spindle, if necessary, until it snaps securely into position. 3. Press the Open/Eject button to retract the disc tray into the drive. Figure 24. You may need to press a finger on the spindle or chassis to stabilize the drive. Press the Open/Eject button again to retract the disc tray into the drive. TEAC PortaDVD User's Manual 19 Specifications Model Disc Type DVE28E DVD-ROM; DVD-Video; Data CD; Audio CD; CD-DA; CD-ROM (Mode-1, Mode-2); CD-ROM XA Mode-2 (Form-1, Form-2); Multi-Session PhotoCDTM; Mixed Mode CD 12 cm, 8 cm DVD Mode: 10, 816KBps (8X DVD speed) CD Mode: 3, 600KBps (24X CD speed) ATAPI (drive side) PCMCIA Card Type II DVD Mode: 110msec CD Mode: 90 msec 512KB Operating: 5° to 55°C Operating: 8% to 80% (non-condensing), wet bulb temperature 29. 4°C Operating: 0. 2G or less (5-500Hz, Sweep) Transportation: (packed): 2G or less (5-500Hz, Sweep) Operating: 5G or less (half-sine wave, 11 msec) excepting CD-DA play mode Non-operating/Transportation: 60G or less (half-sine wave, 11 msec) 60, 000 POH (10% duty) Approved by UL, FCC Disc Diameter Max. [. . . ]