User manual TEAC DUPLI4

[. . . ] ® CD Copy Station CD-R-Dupli-4 User's manual To ensure the smooth handling of your warranty please write the serial number of your drive into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. · Changes in specifications and features may be made without notice or obligation. · · Copyright © 2001, TEAC Deutschland GmbH. First edition: March 2001 Company and product names provided herein are trademarks of their respective companies. New: Now with 12x recording speed Note: CDs can be copied with max 8x speed. 31 ENGLISH CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMPORTANT SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Never use a ballpoint or hard-lipped pen, as this may cause damage to the recorded side. Dirty discs may be cleaned using a soft dry cloth and/or a commerial CD cleaning fluid or ethyl alcohol. Do not use thinner, gasoline, benzene or LP cleaning fluid, as these will damage the disc. If you are in any doubt as to the care and handling of a CD-R disc, read the precautions supplied with the disc, or contact the disc manufacturer directly. 2. 3. 5 Discs recommended for use with the CD-R-Dupli-4 The best results and the highest performance are ensured when using TEAC write-once CD-R media. Your dealer will tell you the sources of those CD-Rs. ENGLISH 44 2. MODES The different modes available are: ­ ­ ­ ­ ­ Copy Test write Compare CD-ROM Play audio Write speed selection These are accessed by pressing the MODE key. When the required mode is shown on the top line of the display press the ENTER key to enter the mode. When the word , , Exit" appears on the display, the ENTER key will halt the current operation. 3. 1 Disc Copy NOTE You should own the copyright, or have obtained the appropriate permission from the copyright owner or the rightful licensor, your unauthorized recording, reproduction or distribution thereof, may result in severe civil and criminal penalties under copyright laws and international copyright treaties This procedure copies the material from the disc (either an audio CD or a CD-ROM) in the MASTER drive to the CD-Rs in the SLAVE drives. You may find it useful to test the copy procedure before committing yourself to an actual copy, however. NOTES Once a copy operation has started, it cannot be stopped before the disc has been finalized. The only way to stop a copy operation is to turn off the power to the unit. Do not use warped discs or discs with off-center holes with the CD-RDupli-4. Modes 45 ENGLISH that the CD-R-Dupli-4 is not subjected to vibration or mechanical shocks. Press the MODE key until the display appears as below (the 12x may also read 8x, 4x, 2x or 1x, and indicates the speed at which the copy will be made ­ see 3. 6 , , Setting the Writing Speed" below). Place the source disc in the MASTER disc tray, and a blank CD-R disc in the SLAVE disc tray. If you decide that you do not want to make a copy at this stage, press the MODE key to return to the mode selection menu. If you have not closed the disc tray(s), they will close automatically, and the CD-R-Dupli4 will start to read the master disc and check the slave discs. If the CD-R-Dupli-4 does not detect any potential problems with the discs, copying will start, and the percentage which has been written is shown on the display, along with an animated display to indicate that writing is currently in progress: Writing 7% 5. After the percentage counter reaches 99, the CD-R-Dupli-4 writes the TOC to the slave disc, and the display shows: Writing Finalizing . . . ENGLISH 4. 46 3. Modes This operation may take a minute or more, depending on the complexity of the disc. When the finalization operation is complete, the display will show: Copy Complete You can now remove the discs using the eject buttons on the drives (these are disabled while the copy process is taking place). [. . . ] Die TEAC Tochtergesellschaften, die autorisierten TEAC Servicestellen und die autorisierten Servicestellen der Facheinzelhändler übernehmen die Garantieleistung in den anderen EG- und EFTA-Mitgliedsstaaten im Rahmen der in dieser Garantie definierten Bestimmungen. Gewährleistungsumfang Soweit dies nachfolgend nicht ausgeschlossen wird, umfaßt die Gewährleistung alle etwaigen Defekte an Material und Herstellung. Folgendes ist aus dem Gewährleistungsumfang ausdrücklich ausgeschlossen: 1. Geräte, die verändert wurden oder deren Seriennummern verfälscht, verändert oder entfernt wurden. [. . . ]