User manual TEAC CR-H225

[. . . ] Z 9A10355400 CR-H225 CD/Receiver OWNER'S MANUAL Contents Thanks you for choosing TEAC. Read this manual carefully to get the best performance from this unit. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. [. . . ] The sound from speakers will be cut off. C Muting To cut the sound temporarily, press the MUTING button. To cancel muting, press the MUTING button again or change the volume setting. < Subwoofer output will not be cut off, when the headphone jack is inserted. 14 2 1 How to adjust TONE/BALANCE/DIMMER 1 Press the TONE/BAL/DIMMER button. Bass control This control is used for adjusting the level of the low frequency sound range. Each time the TONE/BAL/DIMMER button is pressed, the mode is changed as follows: Treble control This control is used for adjusting the level of the high frequency sound range. BASS TREBLE BALANCE DIMMER (normal display) 2 Within 3 seconds, turn the VOLUME/SELECT knob to change the setting. Balance control This control is used for adjusting balance of the volume level between the left and right channels. Dimmer control This control can be used to dim the display panel or to return it to normal. < You can also adjust the dimmer using the remote control (see previous page). 15 Listening to CD/MP3/WMA (discs) 3 2 4 4 Press the OPEN/CLOSE button (L) to close the tray. 1 5 (Audio CD) The total number of the tracks and total play time of the disc is displayed. 1 Press the SOURCE button repeatedly to select `CD'. (MP3/WMA disc) The total number of files of the disc is displayed. 2 Press the OPEN/CLOSE button (L). 5 Press the PLAY button (G). Playback starts from the first track/file. 3 Place a disc on a tray with the printed surface up. < When a disc is on the disc tray, selecting the CD mode will start playback. < If the source is set to `CD', the unit will automatically start playback when you turn on the unit next time. < File types that can be played on this unit: MP3, WMA 16 Listening to a USB device Search 3 1 2 4 21 3 You can play MP3/WMA files by connecting various external USB storage devices such as USB flash memory. 1 Select USB function by pressing the SOURCE You can select a desired directory and an MP3 or WMA file during playback or when stopped. 1 Press the FOLDER buttons (b/5) to select a directory. button repeatedly. `Not connected' will be displayed if no USB device is connected. 2 Press the ENTER button. When an HDD device is connected to this unit, it may take several minutes to display the number of files. 3 Press the PLAY button (y). 3 If you want to select a file, press the FILE buttons (b/5). < The selection moves within the directory. How to disconnect USB Hold down the TIME MODE button for more than 4 seconds until `Pls, remove USB' blinks on the display and then disconnect the USB device. 4 Press the ENTER button. 17 Basic Playback C D BA A To stop playback D Search for a part of a track/file Press the STOP button (H) to stop playback. During playback, hold down the . m or , / button and release it when the part you want to listen to is found. On the remote control use them or , button. B To suspend playback temporarily (pause mode) Press the PAUSE button (J). To resume playback, press the PLAY button (G) or PAUSE button (J). E Direct Playback While in stop or playback mode, you can use the numeric buttons of the remote control to select a track/file. < When you use the numeric buttons, press the input selector button of the remote control first. Playback starts from the selected track/file. C To skip to the next or a previous track/file Press the . < When the . m button is pressed once during playback, the track/file being played will be played from the beginning. To return to the beginning of the previous track/file, press the . m button twice. For instance, to select track/file number 35, press `3', `5'. To select numbers less than 10, press the number and then the ENTER button. As an example, to select number 5, press `5' and the ENTER button. (Optionally, you may press just the number `5' and then wait a few seconds. ) 18 Repeat Playback Every time the REPEAT 1/ALL button is pressed, the mode is changed as follows: Repeat 1 RPT Folder (Only USB, MP3/WMA disc) Repeat All Play (Repeat Off) Repeat A-B This function allows repeat playback of any desired portion of the disc. 1 Designate the point at which repeat playback should start by pressing the A-B button. `Repeat A-' lights up and `B' blinks. 2 When the point at which repeat playback Repeat One Track [Repeat 1] The track/file being played will be played repeatedly. If you select another track/file in Repeat 1 mode, the track/file you selected will be played repeatedly. should end is reached, press the A-B button again. < To return to normal play, press A-B button until `Repeat A-B' disappears from the display. < It must be more than 3 seconds between A and B. Repeat Folder [RPT Folder] (Only USB, MP3/WMA disc) All the tracks or files in the folder will be played repeatedly. Repeat All All the tracks or files will be played repeatedly. 19 Programmed Playback . // y CLEAR PROGRAM < This function allows you to program up to 32 tracks or files for playback in any desired order. 1 Press the PROGRAM button in the stop mode. 3 Press the PLAY button (y ) to start programmed playback. < The programmed contents for audio CDs are not lost even if the unit is turned off, but they are lost when the disc tray is opened or the USB device is disconnected. < The unit will stop automatically when the playback of all the programmed contents is finished, and the program contents disappears from the display, but they are not lost. [. . . ] Press the SLEEP button repeatedly until desired time appears on the display. < If you want to check the remaining time, press the SLEEP button once. The remaining time will be displayed for 3 seconds, and return to the normal display. You can listen to the external source such as VCR deck, MP3 player, TV or tape recorder connecting the AUX or TAPE input jack. Press the SOURCE button repeatedly to select AUX 1, AUX 2, AUX 3 or TAPE. [. . . ]