User manual TEAC CD-W0080A

[. . . ] CD-W516EB CD-RW Drive User's Manual 16x10x40 Internal IDE Drive ® Safety Precautions TEAC CD Rewritable (CD-RW) Drives are high-precision electronic devices. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent electrical shock, do not attempt to disassemble the CD-RW drive. [. . . ] Be very careful and always back up your files before you make any changes. It is also recommended that you install the latest Service Pack to ensure you have the latest updates in your system. For information, see article number Q152734: How to obtain the latest Windows NT 4. 0 Service Pack at www. microsoft. com. Notes: The IDE CD-RW drive is a true Plug-N-Play device; therefore, it will be detected automatically by Windows 98SE/Me/2000-Professional. Windows NT 4. 0 Workstation Users: Windows NT 4. 0 does not support the Plug-N-Play feature. Therefore, confirm that the IDE CD-ROM DRIVE ATAPI version 1. 2 driver is installed. If not, open the Control Panel, double click "SCSI Adapters, " click the "Drivers" tab, then click the "Add" button. At the "Select a SCSI Adapter Option" window, select "IDE CD-ROM DRIVE (ATAPI Ver 1. 2). " Click "Install" and follow the instructions on screen. The drive is recognized by the operating system as a typical CD-ROM drive. Once you confirm that you can read (play) data discs from the CDRW drive, install the Roxio software to enable recording to CD-R and CDRW discs. (See Chapter 3 for more information. ) 12 TEAC CD-RW Drive User's Manual Connecting to Audio Equipment Connecting to Audio Equipment The CD-RW Drive outputs line-level audio signals from the headphone jack on the front panel. For external powered speakers, connect a stereo adapter to split the output into separate leads for the left and right channels. Such adapters convert a male stereo mini-jack to two female phono jacks. Alternatively, if you are using a sound card in your PC, you can connect external powered speakers to the audio connectors on the rear panel of the PC. Note: If you connect external powered speakers to the sound card (on the rear panel of the PC), monitoring sound via headphones connected to the headphone jack on the front panel will be disabled. In this case, connect the headphones to the speaker. powered speakers A. Connect speakers to sound card 3. 5mm stereo mini-plug B. Or connect speakers or headphones to front jack of the CD-RW Drive Figure 10. Connecting Analog Audio Speakers or Headphones TEAC CD-RW Drive User's Manual 13 Connecting to Audio Equipment 14 TEAC CD-RW Drive User's Manual Uninstalling Old Versions of Easy CD Creator Chapter 3. Installing and Using Easy CD Creator 5 on Windows Systems Note: The CD Recording software included in this package will work on systems on which Windows 2000-Professional has been fully installed. It will not work on systems on which Windows 2000 has been installed by upgrading earlier versions of Windows (i. e. , Windows 98SE). This software will not work with Windows 2000 Server, Advanced Server, Datacenter Server, or Windows NT 4. 0 Server. Before installing the software, please make sure that the TEAC CD-RW drive is properly installed as per the instructions in "Chapter 2. To record data or audio onto CD-R or CD-RW discs using your TEAC CD-RW drive, you need to use pre-mastering software, such as Easy CD Creator 5 Basic. [. . . ] Select a Project: Web-checkup Button 2. Click the web-checkup button and follow the instructions on the web page to download the software updates. TEAC CD-RW Drive User's Manual 29 Creating CD Labels (CD label creator button) Creating CD Labels (CD label creator button) If you upgrade to the Platinum version of Easy CD Creator 5 as described above, the CD Label Creator button is activated, enabling you to create CD labels and design CD jackets. Figure 33. Select a Project: CD Label Creator Button Uninstalling Easy CD Creator 5 To uninstall Easy CD Creator 5, use the Add/Remove Program tool in the Control Panel. Click the Add/Remove button. 30 TEAC CD-RW Drive User's Manual Handling Discs Appendix A. About CD-R and CD-RW Discs This appendix explains how to handle, load, and eject CD-R and CD-RW discs. [. . . ]