User manual TEAC CD-W0035A

[. . . ] CD-W58E (CD-RW) User's Manual 8x8x32 ® Safety Precautions TEAC CD Rewritable (CD-RW) Drives are high-precision electronic devices. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent electrical shock, do not attempt to disassemble the CD-RW Drive. [. . . ] Cable Connections 4e) Connect one end of the included analog audio cable to the analog audio connector on the rear panel of the CD-RW drive and connect the opposite end to your sound card. If you have an IDE CD-ROM/DVD drive installed on your system, do the following: Typically, your IDE CD-ROM/DVD drive is connected to the secondary IDE motherboard connector as a Master. In such cases, it is strongly recommended that you connect the CD-RW drive as a Slave drive to the same cable that currently hosts your CD-ROM/DVD drive. Install the CD-RW drive in your personal computer in a horizontal orientation TEAC CD-RW Drive User's Manual 9 Installing the CD-RW Drive (within ±10° of horizontal). Warning: Do not use mounting screws longer than the included 3x5mm screws to secure the CD-RW drive or you may damage the unit. Instead, connect the CD-RW to the vacant middle connector on your existing CDROM/DVD interface cable. If your original cable does not have an available middle connector, you will need to acquire and install a standard IDE cable with three connectors. 5d) Your CD-ROM/DVD drive probably uses an audio cable that is connected to the computer's sound card. Therefore, there is no need to connect the audio cable that came with your CD-RW drive. Connect the power cable to the power connector on the rear panel of the CD-RW drive. Insert the power cable plug in the correct orientation into the power connector. The plug is shaped so that it can be easily inserted in only one orientation; do not force the plug into the connector. The +5v terminal is on the left as you face the rear of the panel; the +12v terminal is on the right. Start your system. 10 TEAC CD-RW Drive User's Manual Installing the CD-RW Drive Notes: · The IDE CD-RW drive is a true Plug-N-Play device; therefore, it will be detected automatically by Windows 95/98/Me/2000-Professional. · Windows NT 4. 0 Users: Windows NT 4. 0 does not support the Plug-N-Play feature. Therefore, confirm that the IDE CD-ROM DRIVE ATAPI version 1. 2 driver is installed. If not, open the Control Panel, double click "SCSI Adapters, " click the "Drivers" tab, then click the "Add" button. At the "Select a SCSI Adapter Option" window, select "IDE CD-ROM DRIVE (ATAPI Ver 1. 2). " Click "Install" and follow the instructions on screen. The drive is recognized by the operating system as a typical CD-ROM drive. Once you confirm that you can read (play) data discs from the CDRW drive, install the Adaptec software to enable recording to CD-R and CD-RW discs. (See Chapter 3 for more information. ) · TEAC CD-RW Drive User's Manual 11 Connecting to Audio Equipment Connecting to Audio Equipment The CD-RW Drive outputs line-level audio signals from the headphone jack on the front panel. For external powered speakers, connect a stereo adapter to split the output into separate leads for the left and right channels. [. . . ] DirectCD Wizard Using DirectCD For information on using DirectCD, refer to the user documentation in PDF format on the CD-ROM or to the Help file (see "About the Reference Guides, ReadMe Files, and Help Files" on page 19). You may also access Help information by clicking the Help button on the DirectCD Wizard Panel (Figure 21). 22 TEAC CD-RW Drive User's Manual Uninstalling Programs Uninstalling Programs · To uninstall Easy CD Creator, select: Start-->Programs-->Adaptec Easy CD Creator 4-->Uninstall. · To uninstall Easy CD Creator, select: Start-->Programs-->Adaptec DirectCD-->Uninstall DirectCD. The system displays the Control Panels window. · You can uninstall both programs from the Add/Remove Programs object in the Control Panel. TEAC CD-RW Drive User's Manual 23 Uninstalling Programs 24 TEAC CD-RW Drive User's Manual Handling Discs Appendix A. About CD-R and CD-RW Discs This appendix explains how to handle, load, and eject CD-R and CD-RW discs. [. . . ]