User manual TEAC CD-P1260

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] If you experience problems with such non-standard discs, you should contact the producers of the disc. < Should the disc become dirty, wipe the surface radially (from the center hole outward towards the outer edge) with a soft, dry cloth: < File names of MP3 should be alphanumeric characters. This unit cannot display symbols and full-size or 2 bytes-wide characters (such as Japanese, Chinese, etc. < Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. such chemicals will do irreparable damage to the disc's plastic surface. < Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to "skip. Playing such discs may cause irreparable harm to the playing mechanisms. < When more than 500 files or 200 folders are recorded on the disc, the unit might not be able to play it correctly. The equipment draws a nominal amount of power from the AC outlet even with its POWER switch in the OFF position. During playback of CD, use this button to switch the ESP function on or off. Note: To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. During playback of a MP3 disc, use these buttons to select a folder in the disc. Be sure to remove the power cord from the AC outlet before repositioning the voltage converter switch. Using a flat-bladed screwdriver, set to the appropriate 230V or 120V position according to your area. For private listening, insert the headphones plug into this jack, and adjust the volume by turning the LEVEL knob. CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. To prevent hum and noise, do not bundle the connection cords with the power cord. The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. < Even if the remote control unit is operated within the effective range (5m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. < If the remote control unit is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. [. . . ] < MP3 tracks recorded out of folders are in the "01" (ROOT) folder. In the stop mode, press the PROGRAM button repeatedly until the program number to be changed appears on the display. Select a new track number using the numeric buttons or the Skip button (. Search for a name of track You can select the track by searching for its name. [. . . ]