Detailed instructions for use are in the User's Guide.
[. . . ] Function specifications
Video input function Input signal Max Field rate Number of cameras NTSC ( Composite video 75ohm 1Vp-p ) 60 fields per second Up to 4 cameras, Auto-skip absence channel. 1ch -> 2ch -> 1ch -> 3ch 4 channels per screen or full screen viewing ( selected channels) 4 Selectable waveform or bar meter (overlay) Date and time : Current time, Record Y/M/D H:M:S Operation display : Operation status Channel number : Display/non-Display selectable (All channels) Push REC button for REC standby, push FWD button to start recording Trigger function record External signal (START/STOP) Manual (Press STOP button) Trigger mode External control (Start/Stop signal) OVERWRITE : Endless record by overwriting older video ONE WAY : Record stops on hard disk full Record resumes on replacing or initializing hard disk Normal playback, Reverse playback, Still image playback, Skip playback, Block jump, Fast playback (x2, x4, x8), Fast reverse playback (x2, x4, x8), Slow playback (1/2, 1/4, 1/8), Slow reverse playback (1/2, 1/4, 1/8) Time search : Search by record date and time Event search : Search from event start date time list ID search : Search from recording start point list Stores latest 1000 events (event start date and time) For events with duplicated time, the first event is stored. Time correction, 30 seconds correction, Communication
Units specifications
Video specifications Video input Video output Picture data handling Channels and Video interval 4ch, BNC NTSC VBS 1. 0 Vp-p 75 ohm 1ch, BNC NTSC VBS 1. 0Vp-p +/-1. 0% 75 ohm Quantization frequency/bit : 13. 5MHz/8bit Video compression : Motion JPEG (Original) 1 2 3 4 5 CHs 1 2 3 4 4 Pixels 720 x 240 720 x 240 720 x 240 720 x 240 360 x 120 Recording interval (fields/sec) 60 30 30/15 15 60
Visual Data Recorder
AQ-VU
http://www. teac. co. jp/
Indication function
Video viewing Waveform/Bar meter Character display
Recording mode
Start operation
Stop operation
Hard disk mode
Data specifications Input Input ranges Output Output ranges Quantization bit rate Sampling method Others Sync accuracy Sync signal
4ch Sampling Frequencies 2kHz fix +/-1, +/-2, +/-5V 4ch +/-2V fix 16bit (LSB 1 bit is used as identification sign) Successive approximation type / Multiplexer type +/-1 frame (in one video channel mode) Start/Stop signal input : Starts on Low, stops on Hi (polarity reversible) Duration : 100mS or more. [. . . ] 10 hours (HDD:80GB) Initialization : Quick (instant), Full (several hours with 40GB HDD) Internal clock accuracy less than 60 seconds per month (ambient temperature 25 degC, at operation) Operating environment Temperature / Humidity (operating) : 0 to 35 degC / 10 to 80%RH Temperature Temperature(non-operating) : -20 to 60 degC non-condensing Always remove the HDD pack out of the main body at the time of the transportation by all means.
*
External trigger Manual operation Internal clock
Safety/Electromagnetic Radiation Comply with Electrical Appliance and Material Safety Law Conform to VCCI Class A Current / Power consumption Approx. 2A / 24W (excluding a supply power to the camera on 12V operation) Power Supply 10 to 17V DC , 100 to 240V AC 50/60Hz (when using an adapter) Dimension ( W x H x D ) Approx. 200 x 60 x 205 mm , 7 7/8" x 2 3/8" x 8 1/16" (excluding protruding Parts) Weight Approx. 2. 3kg/5. 07lb (Including 40GB HDD pack) Standard accessories Manual, Veiw Softwarer ( CD-ROM ), HDD Pack ( 40GB ), USB cable, BNC cable, AC adapter Equipment maintenance such as elevators
Others
32 channels synchronized recording
By connecting with LX-100 series data recorder, as much as 32 channels of data can be synchronously recorded.
VIDEO OUT Connector CAMERA IN Connector
LAN Connector
SYNC IN Connector DC IN Connector POWER Switch
CAMERA POWER Connector LCD Display
ANALOG IN/OUT Connector POWER LED
OPTION
LX-100 series sync. kit Contents of Kit Cable LX View Basic Software PL-S1100) Temporary monitor of plumbing and pump pressure such as in air conditioning repair
VISUAL DATA RECORDER
AQ-VU
LX View Sync. Option Software
205
Network Monitoring AQ-Net ( PL-S1100 ) Adapter cable for camera power supply (Approx. 10cm) CL-AQ-CPWR BNC conversion cable (1. 5m) CL-AQ-BNC HDD Pack (40GB) PH-AQ-40 HDD Pack (80GB) PH-AQ-80 Factory/Plant equipment
Key ENTER Key
MONITOR Key STOP Key REC Key
MENU Key FWD Key PAUSE Key REV Key
It is used in a wide field
60
HDD Pack
[ Product line ] [ Architecture ]
Extended recording at an unattended automatic product line Building skew and bridge shake
5. 5
17
200
17
Unit : mm
[ Vehicle performance test ] Vibration data with synchronous video on high-speed driving test [Bio-measurement] Driver's bio-measurement with synchronous video [ Product line ] Monitor to find a product line problem and record vibration outbreak [Support Service ] Temporary measurement and monitor of manufacturing support service [ Elevators ] [ Factory ] Monitor elevator malfunction Periodic maintenance of plant equipment and temporarily monitor faulty point [ Machinery ] Environmental tests of machinery for deterioration, quake resistance, weather change [ Product line ] Production line safety check
Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.
Information Products Division
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan Phone : +81-42-356-9161 FAX : +81-42-356-9185 URL : http://www. teac. co. jp/
Copyright TEAC CORPORATION 2008
PRINTED IN JAPAN 1008 1 NH BSC-029B
[ University / Research organization ]
4 channels synchronous video and analog data recording Quickly verify the recorded video and analog data on-site with 6. 4" LCD monitor
Synchronous video and data recording
Video x4
Video
NTSC Camera (example)
Controlling and monitoring from the desk
LAN
4ch 3ch 2ch 1ch
4ch
High-resolution recording
Synchronous recording and play-back
4ch
Video
Motion-JPEG
Wave data
Analog
Analog data x4
Vibration Pressure Weight Temperature Strain
etc.
Motion-JPEG with 60 fields/sec max
Analog Input ON/OFF Synchronous play-back of recorded video and analog data
Displacement Noise *
* Sampling frequency is 2 kHz, so the band-width is 1 kHz or less.
Monitoring at the desk
AQ-VU is capable of synchronously recording up to 4 channels of video camera data and up to 4 channels of analog data. The recorded video and analog data are stored in the HDD pack and they can be synchronously played back. The video is recorded as fast as 60 frames per second per channel in Motion-JPEG for smooth high resolution. The number of recording channels in both video and analog can be freely selected based on application needs. The accessory viewer software allows play-back of the recorded video and analog data synchronously on PC. It can record a video with various synchronized measurement data using LX-100 series. OPTION
Monitoring in the field
Removable HDD Pack (USB Interface)
OPTION
Stand-alone unit (not requiring PC)
It can record video and analog data without PC connection. Small footprint allows use in confined spaces.
Perfectly synchronized
Perfectly synchronized between the video and data even after the extended recording. Accumulation delay time is zero * ( Video and analog signals are recorded as a set frame, preventing accumulation delay time. [. . . ] The video at mouse cursor position can be played-back
Small and lightweight (2. 3kg/5. 07lb)
Small, portable, compact package allows easy use of AQ-VU in the field (2. 3kg/5. 07lb). Power for camera is supplied, allowing for mobile environments such as vehicles, trains, etc.
Example of Production Line
This is example for monitoring SMT machine using four cameras and accelerometers.
Extended recording time (5 hours or continuous record)
5 hours recording time with 40GB HDD pack. (10 hours recording time with 80GB HDD pack) Endless recording mode allows use for extended time monitoring such as surveillance etc. [. . . ]