User manual TEAC AH01 B

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to aler t the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 12) Use only with the car t, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] < Read the instructions of each device that you intend to use with this unit. LINE OUT L R Computer Install the dedicated TEAC driver software on your computer before connecting the TEAC A-H01 unit to the computer. (page 12) RCA cable USB cable A B C D RCA digital coaxial cable E Optical digital cable DIGITAL OUT (OPTICAL) Digital audio output device Provided power cord Connection terminal or audio input Subwoofer DIGITAL OUT (COAXIAL) Digital audio output device Wall socket 6 A Analog audio input terminals Input 2-channel analog audio signals. Connect an audio output device such as cassette deck or CD player to these terminals by using RCA cables. Connect the R and L terminals on this unit to the right (R) and left (L) terminals on an audio output device respectively. White (L) Red (R) White (L) Red (R) B USB input terminal Inputs digital audio from a computer. < Install dedicated TEAC driver software on the computer before connecting the unit. (page 12) < Note that connection cables indicated other than the power cord are not included with this product. C Subwoofer terminal If you want to use a subwoofer, connect it to this terminal. COAXIAL: RCA digital coaxial cable OPTICAL: Optical digital cable (TOS) E Power cord connector Connect the supplied power cord to the power cord receptacle. After all other connections are complete, connect the power cord's plug to the wall socket. Do not use any power cords other than the one included with this unit. Unplug the power cord when you are not going to use the unit for several weeks. 7 Speaker Connection Right Speaker CAUTION before connection Left Speaker How to connect: 1 Turn the terminal cap counterclockwise to loosen it. 2 Insert the wire into the terminal and < After all other connections are complete, connect the power cord's plug to the wall socket. < Read the instructions of each device that you intend to use with this unit. < The red speaker terminals are + (positive) and the black speaker terminals are – (negative). Generally, the + side of the speaker cable is marked to make it distinguishable from the – side of the cable. Connect the marked side to the + terminal and the unmarked side to the black – terminal. < The metal portions of the two separate wires should not touch or an electrical short may occur. Shorted wires can create a fire hazard or induce a failure in your equipment. To prevent hum and noise, avoid bundling the cables together with the AC power cord or other cables. [. . . ] Make sure power is supplied to the AC outlet by plugging in another item such as a lamp or a fan. This unit can be connected through USB and used with a computer running one of the following operating systems: Microsoft Windows Windows XP (32-bit), Windows Vista, Windows 7 Apple Macintosh Mac OS X 10. 4 or later Use with a computer running a different operating system cannot be guaranteed. Starting other applications during playback of a music file may interrupt playback or cause noise. [. . . ]