User manual TDK TRANS-IT

[. . . ] Microsoft, Windows and the Windows Logos are registered trademarks of the Microsoft Corporation. Apple and Macintosh are registered trademarks of Apple Computers, Inc. All other trade names referenced in this user's guide belong to their respective owners. [. . . ] You may also loose access to your drive and may not be able to retrieve any files stored on the drive. To remove Trans-It (not required with Windows 98SE): 1. Double click on the green Safely Remove Hardware arrow in the Windows task bar. 2 2. In the Safely Remove Hardware box, highlight USB Mass Storage Device and then click Stop. 3. In the Stop a Hardware device window, select TDK Trans-It USB Device and click OK. 4. Wait for the notice that it is safe to remove the drive and then remove Trans-It. NOTE: Instead of following the procedure above, it is also safe to click the U3 Launchpad's Eject button and then remove Trans-It. NOTE: If your operating system is Windows 98SE, you don't need to follow this procedure. You can safely remove Trans-It without taking any special steps, so long as the device is not actively transferring data. The device's LED will illuminate when it is transferring data. Apple Macintosh To connect Trans-It: 1. Insert Trans-It into an available USB port on your computer and wait while it is initialized. 2. Click on the Trans-It drive icon once Trans-It has been successfully mounted on your Mac. NOTE: A second Trans-It icon that looks like a disc may appear on your Mac. You can now save, copy and delete files on Trans-It in the same manner you would with a hard drive. Trans-It's LED will illuminate when data transfer is active. IMPORTANT NOTE: Do not remove Trans-It from the USB port without following the proper procedure. Removing the drive improperly may corrupt the data stored on the drive and the data being transferred. You may also loose access to your drive and may not be able to retrieve any files stored on the drive. To remove Trans-It: 1. Unplug Trans-It from the USB port once the icons are not visible on your Mac OS desktop. 3 Frequently Asked Questions How do I use Trans-It after connecting it to my computer?After Trans-It has been connected to your computer's USB port, the operating system will recognize and initialize it. [. . . ] If the Product is no longer available, then it may be replaced with product determined by TDK to be of similar value and performance. Bundled Software for additional applications and any other software is supplied on an "AS IS" basis, and without any express or implied representations or warranties, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, title and non-infringement. Please refer to any documentation included with such software for your rights and obligations . [. . . ]