User manual TASCAM US-122MKII

[. . . ] D01087920A US-122@# USB 2. 0 Audio/MIDI Interface OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS For U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] 3 Click the "Install Driver" button when the screen below appears. (If this sreen does not appear automatically, find and open the "Autorun2. exe" program on the driver CD-ROM. ) 6 Read the contents of the License Agreement, and select "I accept the agreement" if you agree to the terms. Next, click the "Install" button to start installation. 7 When the screen below appears, use the supplied USB cable to connect the unit to the PC. 4 When the language selection screen (below) appears, select the language you prefer and then click the "OK" button. TASCAM US-122MKII 13 3 ­ Installation 8 When the screen below appears, unplug the connecting USB cable from the unit or the PC. Click the "Reboot now" button to restart the PC to use the driver. 9 When the screen below appears once more, reconnect the unit and the PC with the USB cable. 11 After the PC has restarted, open the TASCAM US-122 MKII / US-144 MKII (Start > Control Panel) or US-122 MKII & US-144 MKII Control Panel (Start > All Programs > TASCAM). If the Driver Version, Device and other data appear correctly, the installation has succeeded. 14 TASCAM US-122MKII 3 ­ Installation Installing the driver for Mac OS X 1 Confirm that the US-122MKII is not connected to the computer. 2 Double-click the "US-122MKII_US144MKII_1. 14. dmg" on the included CD-ROM. The "TASCAM_US122MKII_US-144MKII_1. 14. mpkg" is created on the desktop. 3 Dboule-click the "TASCAM_US122MKII_US-144MKII_1. 14mpkg" on the desktop to launch the installer. · Using Windows "Add or Remove Programs" 1 Open the "Control Panel" from the "Start" menu. 3 Select "US-122 MKII / US-144 MKII" from the list and click "Change or Remove Programs". 4 Follow the instructions on the screen for the remaining procedure. Mac OS X 1 Insert the CD-ROM into the PC and double click "TASCAM US1xx remover" icon. Uninstalling the driver Windows There are two ways to uninstall the driver as shown below. · Using the Installation CD-ROM: 1 Follow steps 1 to 4 under "Installing the driver for Windows" (See page 13. ) 2 At step 5 of the procedure, click "Remove the driver". 2 Follow the instructions on the screen for the remaining procedure. Frequently asked installation questions and answers (FAQ) Windows driver installation Q: When I connect the unit to a computer, the Windows "Hardware Wizard" appears and I cannot install the driver. A: Close the Windows "Hardware Wizard" and disconnect the unit. The menu for installing the driver appears automatically. 3 Follow the instructions on the screen for the remaining procedure. TASCAM US-122MKII 15 3 ­ Installation Select "Install Driver, " and follow the instructions shown on the screen. If you have downloaded the driver from the TASCAM website (htt://www. tascam. com), expand the ZIP archive, launch the "setup. exe" file, and follow the instructions on the screen. Q: I loaded the installation CD-ROM into a Windows computer, but the driver installation menu does not appear. A: The automatic playback settings for the disc drive might be disabled. Open the supplied driver CD-ROM using Windows Explorer, and doubleclick the "Autorun2. exe" file to manually open the installation menu. Installing Cubase LE4 For details see the Cubase LE4 Quick Start Guide. Settings on your computer Here are a few basic points to help you set up your computer for best performance with audio applications. You will probably use your computer for applications other than audio, but we recommend that you avoid running other applications at the same time you are running audio programs. This means that if you are running other applications (especially graphics or Internet tools) at the same time as your audio application, the processing may not happen fast enough. 16 TASCAM US-122MKII 4 IMPORTANT SAFETY PRECAUTIONS ­ US-122MKII Control panel settings Overview The Control Panel lets you make various settings for the US-122MKII's functionality. On Windows XP and Windows Vista, the US-122MKII & US-144MKII Control Panel shortcut can be found in the Windows Start menu > Control Panel or the Start menu > All Programs > TASCAM. [. . . ] If you make the following settings, sound will be output through this unit, but no sound will be output by the computer's speakers or headphone jack. Windows XP 1 Shut down all applications, and open the "Control Panel" from the "Start" menu. 2 Open "Sounds and Audio Devices" NOTE If you cannot find the above item, click "Sounds, Speech, and Audio Devices" and it will appear. 2) Change the USB port Since the unit may not properly function with some USB ports, try connecting to a different (built-in) USB port, and reinstall the driver. 26 TASCAM US-122MKII 8 ­ Troubleshooting 3 Click the Audio tab, and set the "Default device:" for "Sound playback" and "Sound recording" to "TASCAM US-122MKII. " Windows Vista 1 Shut down all applications, and open the "Control Panel" from the "Start" menu. 2 Open "Sound. " NOTE If the above item does not appear, click "Hardware and Sound" and it will appear. · The sound breaks up or there is noise. [. . . ]