User manual TASCAM MD-301 MKII

[. . . ] » MINIDISC DECK 3D0024910A Ü ÿ Y This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] When timer recording is performed in the "SHUFFLE" mode or "PROGRAM" mode, the deck automatically enters the "CONTINUE" mode. Be sure to turn the deck on again and eject the MD within 3 or 4 days of timer recording. When the MD is ejected, the recorded contents will be written on the MD. If the deck is left off for a long time after the timer recording has finished, the contents may disappear. During timer recording, recording starts from the end of the previously-recorded portion on the MD. If the timer is left in [REC], the deck will automatically start recording the next time the power is turned on. . . . The remaining recording time (REMAIN) is only displayed in the Record-Ready mode. The disc title can be displayed only when it has been recorded onto the MD. Checking the Recorded Tracks ª Press the [¥PLAY] button immediately after stopping recording. The track which has just been recorded will be played from the beginning. Recording ªSTOP ¥PLAY ª To play from the first track of the MD after recording: Press the [ª STOP] button again immediately after stopping recording then press the [¥PLAY] button. Recording ªSTOP ªSTOP ¥PLAY ­ 11 ­ ENGLISH Useful Tips for Playback Buttons used on this page Using the Display Window The information shown on the display allows you to check the disc title, track title, the total track number in an MD, total playing time, remaining recordable time of the MD. Each press of the [DISPLAY] button changes the display as shown below. In the Stop mode: Selecting the Desired Track ª Playing a track by direct search Specify the desired track by pressing the numeric buttons (1 to 9, 0, +10) on the remote control unit. Examples of operation for direct search of track number 10 or more: To search track number 10: Press +10 once then 0. Press the [CLEAR] button while "TRACK NO. " is blinking to cancel it. ª To skip to the previous or next track Turn the [µ TRACK] dial clockwise or counterclockwise (or press the [µ TRACK] buttons on the remote control unit) during playback to skip to a track located after or before the current track. ª To search a desired section During playback, press and hold the [/°] (or [ SEARCH°]) buttons to search the desired section. In the Play-Ready mode, the desired section can be searched by observing the elapsed playing time or remaining playing time on the display. Normal search may not be possible if there are several successive short tracks of only a few seconds in length. Playing Tracks in Random Order (Shuffle Playback) Each track on the disc is played once in random order. 1. In the Stop mode, press the [PLAY MODE] button repeatedly until "SHUFFLE MODE" is displayed (" " lights up). To play the next track, turn the [µ TRACK] dial clockwise (or press the [] button on the remote control unit) during shuffle playback. To play from the beginning of the current track, turn the [µ TRACK] dial counterclockwise (or press the [µ ] button on the remote control unit) during shuffle playback. The Shuffle mode will not be canceled even when the power is turned off. To cancel the Shuffle mode, press the [PLAY MODE] button repeatedly until "CONTINUE MODE" is displayed. In the Play mode: . . . [. . . ] When "Protected !!" is displayed, the MD is protected against accidental erasure. When "D-IN UNLOCK !" is displayed and the source audio is not input, connect the source through digital connection or record the audio using the analog input. After timer recording, turn the power back on within 3 or 4 days and eject the MD. If the deck is left off for a long time, the recorded contents may disappear. [. . . ]