User manual TASCAM HS-P82

[. . . ] D01088920A HS-P82 Portable Multitrack Field Recorder OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. [. . . ] The 2mixfile is always recorded as a polyphonic file (stereo file). About project screens Press the PROJECT key on the front panel to open the PROJECT screen. The last used PROJECT screen page (project selection, scene selection or take selection) opens. Scene screen Project name display: The current project name is shown. TASCAM HS-P82 31 5 ­ Projects NUM OF TAKE: This shows the number of takes in each scene. TOTAL TIME: This shows the total recording time of the takes in this scene. ENTER: Press a scene " ®" button to show the contents of that scene. INFO button: Touch to open a pop-up window that shows information about the scene that is currently selected. If no scene is selected, press this button to show information about the current project. MULTI SELECT button: Touch to enable the selection of multiple scenes. MENU button: Touch to open a pop-up menu where you can select LOAD, REBUILD, COPY, and DELETE. Scroll buttons: Use these buttons to scroll to the beginning or end of the list or scroll one page (five lines) forward or backward. You can also scroll through the list one line at a time using the DATA dial. Touch the project/scene name shown to the left of the battery icon to open a screen that shows the list of takes in the current project/scene. You can also scroll through the list one line at a time using the DATA dial. Project operations Creating new projects 1 Press the PROJECT key on the front panel to open the PROJECT screen. 2 Touch the CREATE PROJECT button on the PROJECT screen to open the CREATE PROJECT screen. This screen has two pages. On the first page of the CREATE PROJECT screen, you can make the following settings. Project Name: Touch the Project Name button to open the screen where you can edit the project name. On the PROJECT NAME screen, the maximum number of characters allowed is indicated by the yellow background. Scene Name: Touch the Scene Name button to open a screen where you can change the name of the first scene. 48k-0. 1% sampling frequency is pull-down compatible, and 48k+0. 1% is pull-up compatible. To use the actual sampling frequency of the recordings, select Actual Rate. For pull-up/ pull-down, select Fake Rate to write 48k instead of 48k±0. 1%. NEXT: Open the next page. Take screen Scene name display: The current scene name is shown. INFO button: Touch to open a pop-up window that shows information about the take that is currently selected. [. . . ] Path Name is too long. The record function is not ON for any tracks. The maximum number of files and folders that can be created has been reached, so the operation could not be completed. The selected project/scene/take could not be found, so the operation could not be completed. The maximum number of files or folders has been reached, so you cannot create a new folder. [. . . ]