User manual TASCAM DR-680

[. . . ] D01098520A DR-680 Portable Multitrack Recorder OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. For U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] 2 Use the DATA wheel to select the REC menu item, and press the ENTER key to open the REC screen. 3 Use the DATA wheel to select the FILE item, and press the key or ENTER key. 5 Press the key to return to the selection of items on the REC screen. Press the HOME/FUNC key to return to the Home Screen. Creation of new takes when restarting recording 4 Use the DATA wheel to select one of the following options: MONO, STEREO (default value), or 6ch . NOTE · When set to MONO, a mono file is created for each recorded track. When set to STEREO, a stereo file is created for each pair of tracks (1-2, 3-4 and 5-6). · 6ch cannot be selected when the file format is set to MP3 or the sampling frequency is set to 192 kHz. Set whether the unit continues recording to the same take or begins a new take when restarting recording. This setting determines the take recorded to when you press the REC key again after having pressed the PAUSE key to put the unit in recording standby. 2 Use the DATA wheel to select the REC menu item, and press the ENTER key to open the REC screen. 3 Use the DATA wheel to select the PAUSE item, and press the key or ENTER key. 5 Press the key to return to the selection of items on the REC screen. Press the HOME/FUNC key to return to the Home Screen. TASCAM DR-680 25 4 ­ Recording 4 Use the DATA wheel to select one of the following options. SAME TAKE Editing the user take names You can edit the user words used for take names on the NAME ED T screen. 2 Use the DATA wheel to select the REC menu item, and press the ENTER key to open the REC screen. 3 Use the DATA wheel to select the NAME item, and press the key. (default value): NEW TAKE : Continue recording to the same take. Record to a new take. 5 Press the key to return to the selection of items on the REC screen. Press the HOME/FUNC key to return to the Home Screen. Setting the name given to recording takes Set whether take names are based on the date or one of three names that have been created on the NAME ED T I screen. 2 Use the DATA wheel to select the REC menu item, and press the ENTER key to open the REC screen. 5 Use the DATA wheel to select the user word that you want to edit, and press the ENTER key. 4 Press the key again to open the USER WORD edit screen. 4 Use the DATA wheel to select one of the following options. DATE 6 Use the following keys to edit the user words. Erase the character at the cursor position The take name is based on the date. (default value): USER 1 : USER 2 : USER 3 : DATA wheel: ¯ key: The take name is based on a user word definedontheUSER WORD ED T screen. I The take name is based on a user word definedontheUSER WORD ED T screen. I The take name is based on a user word definedontheUSER WORD ED T screen. I Â key: 7 When you have finished editing a user word, press the ENTER key. 8 Press the MENU key to return to the selection of items on the REC screen. Press the HOME/FUNC key to return to the Home Screen. 5 Press the key to return to the selection of items on the REC screen. [. . . ] Confirm that the sampling frequency used by the external digital device and this unit are compatible. If you do this, you will not be able to use the DIGITAL IN, but otherwise recording will be possible. If this message appears during recording, noise might be recorded. " DIN unlock status has ended. If this message appears during recording, noise might be recorded. " MBR Error I i CARD nt F ormat Error F ormat CARD F l Not F ie ound Mak Sys F l e ie I nva i SysF l Mak Sys F l ld ie e ie I nva i Card Change Card ld Protec ted Card Change Card Wr te T meout i i Card F l ul Max F l S ze ie i Fl F l ie ul T eFl ak ul Card Error F l Protec ie ted No Card F l Not F ie ound i TAKE n D N un ock I l DNl I ock 48 TASCAM DR-680 9 ­ Messages Message Not Cont nued i F l Error ie Can t Save Data ' P ayer Error l Dev ce Error i Wr t ng F i ed ii al Sys Rom Err Sys tem Err 50 Sys tem Error 1 Sys tem Error 2 Sys tem Error 3 Sys tem Error 4 Sys tem Error 5 Sys tem Error 6 Sys tem Error 7 Sys tem Error 8 Sys tem Error 9 If any of these errors occur, turn the unit power OFF and restart it. [. . . ]