User manual TASCAM DP-01FX/CD

[. . . ] DP-01 · DP-01FX · DP-01FX/CD RECORDING A TRACK · · Connect powered speakers or an amplifier to the LINE OUT. [. . . ] Press the REWIND BUTTON twice until the display reads ABS 00. 00. 00. 00 Press and hold the RECORD button and simultaneously press the PLAY button the REC light above channel one, the PLAY light and the RECORD light should become solid. Press the REWIND button twice until the display reads ABS 00. 00. 00. 00 Press the PLAY button. · · · · · · · You should hear what you recorded. MASTERING · · · · Use the channel faders to set the level for each track. Use the EFFECT SEND knob to send a track to an external effects processor (if attached) or built-in reverb (DP-01FX only). Use the EFFECT RETURN knob to control the overall level of the effect. As your mix is being recorded, you can change levels, panning, effects and even fade the Master level down at the end of the song. When the recorder reaches the end of the song (which you set using the SET OUT button), recording will stop. You can rewind to the beginning of the song and listen to the mix you just recorded. · · · · · · · EXPORTING A MASTER TO A PC OR MAC Do not connect the USB cable to the computer until instructed to. Transferring files to the FAT partition: Tracks have to be transferred to the Fat partition so that it can be read by the computer. · · · · · · · · · Press the MASTER button until the light is OFF Press MENU Select the WAVE Press the RIGHT ARROW Select EXPORT MASTER Press the RIGHT ARROW. [. . . ] Click on the removable drive Icon labeled DP-01 Open the WAVE folder. Use the computer's operating system to copy the exported tracks from the WAVE directory to the computer. [. . . ]