User manual TASCAM DA-98 ERROR CODES

[. . . ] Clock Source: No Word Signal Problem No word clock is fed into the WORD IN or the incoming word clock frequency is not correct. Solution Feed the correct word clock. WARNING!Clock Source: No Video Signal No video signal or frame pulse is fed into the VIDEO IN or the incoming clock is not correct. Feed a correct video signal or frame pulse. WARNING! [. . . ] Broken tape: Replace the tape The tape is broken. Replace the tape. WARNING!TDIF(dubbing)cable not connected TDIF-1 (dubbing) cable is not connected. This message appears when DIGTAL IN is turned on. Connect PW-88D or PW-88DL cable to the TDIF-1(DIGTAL I/O) connector. Condensation on drum Condensation occurred on the head drum. Leave the unit switched on for one or two hours, then cycle the power before using. WARNING Messages on LCD (continued) Display WARNING!Servo error ## Cycle the power ## = 11 ## = 21 ## = 31 ## = 41 ## = 02 ## = 04 ## = 08, 59, 68 Problem Servo error ## occurred. If a "Servo error" persists, contact TASCAM representaives. Unable to shift mechanism mode within the five seconds of command reception. Cannot Chase Master frame mode doesn't match. The Tc Frame Mode setting is different from the incoming video signal frame when the CHASE is turned on. Correct the Tc Frame Mode. TC Record Source: Not Synchronized The incoming Timecode does not synchronize to the DA-98 system clock. The message appears when TC REC is on with the External TC selected as TC Record Source. No timecode is recorded on the tape. Feed and record a correct timecode. Or select INTERNAL clock for CHASE if using the recorded unsynchronized timecode. Cannot Chase No Master TC No master timecode is fed or the incoming timecode may have some drop. Feed a correct timecode. [. . . ] Please use Ver #. ## or later Problem Sync ROM version does not match with the Sys ROM version. Solution Contact TASCAM representaives. Error Messages on 7-seg LED Display e. Use 120-minute or shorter tapes. Other Messages on 7-seg LED Display --load--unloadbot eot no tape no abs-t Meaning Loading the tape. [. . . ]