User manual TASCAM DA-88 MESSAGE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TASCAM DA-88 MESSAGE. We hope that this TASCAM DA-88 MESSAGE user guide will be useful to you.
Manual abstract: user guide TASCAM DA-88 MESSAGE
Detailed instructions for use are in the User's Guide.
[. . . ] Clock Source: No Word Signal
Problem
No word clock is fed into the WORD IN or the incoming word clock frequency is not correct.
Solution
Feed the correct word clock.
WARNING!Clock Source: No Video Signal
No video signal or frame pulse is fed into the VIDEO IN or the incoming clock is not correct.
Feed a correct video signal or frame pulse.
WARNING! [. . . ] Broken tape: Replace the tape
The tape is broken.
Replace the tape.
WARNING!TDIF(dubbing)cable not connected
TDIF-1 (dubbing) cable is not connected. This message appears when DIGTAL IN is turned on.
Connect PW-88D or PW-88DL cable to the TDIF-1(DIGTAL I/O) connector. Condensation on drum
Condensation occurred on the head drum.
Leave the unit switched on for one or two hours, then cycle the power before using.
WARNING Messages on LCD (continued)
Display
WARNING!Servo error ## Cycle the power ## = 11 ## = 21 ## = 31 ## = 41 ## = 02 ## = 04 ## = 08, 59, 68
Problem
Servo error ## occurred. If a "Servo error" persists, contact TASCAM representaives.
Unable to shift mechanism mode within the five seconds of command reception. Cannot Chase Master frame mode doesn't match.
The Tc Frame Mode setting is different from the incoming video signal frame when the CHASE is turned on.
Correct the Tc Frame Mode. TC Record Source: Not Synchronized
The incoming Timecode does not synchronize to the DA-98 system clock. The message appears when TC REC is on with the External TC selected as TC Record Source. No timecode is recorded on the tape.
Feed and record a correct timecode. Or select INTERNAL clock for CHASE if using the recorded unsynchronized timecode. Cannot Chase No Master TC
No master timecode is fed or the incoming timecode may have some drop.
Feed a correct timecode. [. . . ] Please use Ver #. ## or later
Problem
Sync ROM version does not match with the Sys ROM version.
Solution
Contact TASCAM representaives.
Error Messages on 7-seg LED
Display e. Use 120-minute or shorter tapes.
Other Messages on 7-seg LED
Display --load--unloadbot eot no tape no abs-t Meaning
Loading the tape. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TASCAM DA-88 MESSAGE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TASCAM DA-88 MESSAGE will begin.