User manual TASCAM DA-78HR QUICK START

[. . . ] Press the MENU key until the display shows SYSTEM Press SUB MENU key until the display shows ID SELxx Use the UP and DOWN ARROWS to change the ID value The machine ID must be set to anything but 1(You would only use offsets if the DA-78HR was going to be used as a slave) Press the SHIFT key so the indicator lights Press the AUTO IN/OUT (OFFSET) key Use the UP and DOWN ARROWS to change the value Use the SHIFTED UP and DOWN ARROWS to move the cursor Press the SHIFT key so the indicator lights Press the MENU key until the display shows MIDI-- Press SUB MENU key until the display shows ID followed by the current ID # (1-127) Use the UP and DOWN ARROWS to change the MIDI ID number. Press the SHIFT key so the indicator lights Press the MENU key until the display shows AUDIO1-- Press SUB MENU key until the display shows IN PATCH Press the REC FUNCTION button of the track you wish to assign an input to Use the UP and DOWN ARROWS to change the input assigned to that track. VARI SPEED (PITCH CONTROL) 1. [. . . ] This is NOT a replacement for the instruction manual, but think of this a quick reminder of the steps involved in executing various functions on the unit once you understand the concepts in the manual. The DA-78HR is a very versatile machine and we highly recommend reading the manual with the unit in front of you so you can get a better understanding of the machine. The DA-78HR has many powerful features that even the most seasoned professional will miss out on unless you read the manual to discover its depth!Most of the editable parameters on the unit are accessed using four keys. When the SHIFT key has been pressed with it's indicator blinking, the REPEAT/MENU key is the gateway to the menus of the DA-78HR. When the MENU key is pressed, one of these groups names are displayed on the screen and the unit enters menu mode. Continually pressing the MENU key will step you through the eight different menus in a circular fashion. You'll notice that there are two dashes (--) after the name of each menu. When a menu is displayed, pressing the SUB MENU key brings up the sub-menus associated with that menu. Continually pressing the SUB MENU key cycles through the different sub-menus. The UP and DOWN ARROW keys are used to change the value of the parameters within these menus and sub-menus. Pushing both ARROW keys simultaniously will change the current parameter's value back to the default setting. Some parameters have multiple values displayed on the screen at one time. To move the cursor to the right you would hold down SHIFT key and press the UP ARROW key. Note: As you follow these instructions, in some cases the display may change to a default sub menu after briefly displaying information. [. . . ] Press play and after the 5 second pre-roll the DA-78 will automatically go in and out of record at the times you programmed. Press the CLEAR (PRE ROLL) key until you see PR 0005 RH. This tells you that your pre-roll is set to 00 minutes and 05 seconds. [. . . ]