User manual TASCAM DA-302

[. . . ] » DA-302 Dual Digital Audio Tape Deck OWNER'S MANUAL D00313200A Important Safety Precautions Ü ÿ Y CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. [. . . ] The input signals being recorded are output from the ANALOG OUT connectors and DIGITAL OUT connector of Deck 1 (Deck 2). 17 Section 6 : Playback 6-1. The playback sound can also be monitored through the ANALOG CASCADE OUTPUT connectors. When "Cas Out" is set to "Auto" in the menu (úp. 28), playback sound output is switched from Deck 1 to Deck 2 at the time Deck 2 starts playback. In this status, if the PLAY key of Deck 1 is pressed, you can monitor the playback sound of Deck 1 again. 1 2 Set the COMMON MODE switch to OFF. When the REW key (F FWD key) is pressed during playback, 2 times (3 times) normal speed rewind cueing (fast-forward cueing) is performed. Holding the REW key (F FWD key) pressed for 1 second or more during playback performs 2 times (3 times) normal speed rewind (fast forward) cueing for as long as the key is pressed. Pressing the REW key during fast-forward cueing switches to 2 times normal speed rewind cueing. Pressing the F FWD key during rewind cueing switches to 3 times normal speed fast-forward cueing . Playback signals are output from the ANALOG OUT and DIGITAL OUT connectors of Deck 1 (Deck 2). 6-3. Skip playback When a Skip ID is detected during playback, the tape is fast-forwarded to the next Start ID and resumes playback. 1 2 Select the deck with the SELECT 1/2 key. Press the MENU key to show the following menu in the time display. Skip1 Off 3 Set to "On" with the UP/DOWN key to engage the Skip Play mode. 6-2. Continuous playback With continuous playback, the tapes in Deck 1 and Deck 2 are played back continuously. . . . If the STANDBY key is set to ON, the Play-Pause mode is engaged at the Start ID. 6-4. Single playback When a Start ID is detected during playback, this function automatically engages the Play-Pause mode. 1 2 3 4 5 Set the COMMON MODE switch to "1 > 2". When the ABS time of Deck 1 reaches the time set with "Seqtime", Deck 2 starts playback automatically. Deck 1 automatically rewinds the tape to the beginning either 3 minutes after the time set with "Seqtime" or when the tape end is reached. Deck 2 automatically rewinds the tape to the beginning either 3 minutes after the time set with "Seqtime" or when the tape end is reached. 1 2 Select the deck with the SELECT 1/2 key. Press the MENU key to show the following message in the time display. Single1 Off 3 Set to On" with the UP/DOWN key to engage the Single Play mode. . . . The playback signals are output from the ANALOG OUT and DIGITAL OUT connectors of Deck 1 (Deck 2). 18 Section 6 : Playback 6-5. Repeat playback This function allows one or all programs to be played back repeatedly. ·With one program repeat, the tape is automatically rewound to the previous Start ID when a Start ID is detected. ·For all program repeat, the tape is automatically rewound to the beginning when the tape end is reached or the End ID is detected. 6 7 Up to 50 programs can be programmed in the same way. [. . . ] When this is set to "On" with the UP/DOWN key, the master deck starts operation again after the last slave deck finishes the operation for continuous recording/playback using more than one DA-302. A digital-to-digital copy is impossible. When ID (11) is recorded: One digital-to-digital copy is possible. When ID (00) is recorded: Multiple-generation digital-to-digital copying is possible. 29 Section 11 : Specifications Format : Tape Speed : Rotary head digital audio tape deck 8. 15 mm/sec. (SP: Double speed dubbing, LP: 4 times normal speed dubbing) 4. 075 mm/sec. (LP: Recording/playback) Recording Time : 120 minutes (SP: With a 120-minute tape) 240 minutes (LP: With a 120-minute tape) Fast Winding/Rewinding Time : Approx. 60 seconds (with a 120minute tape) Channels : Stereo 2 channels Quantization : 16-bit linear (SP), 12-bit non-linear (LP) Error Correction Method : Doubled Reed Solomon code Sampling Rates : 48 kHz (recording/playback) 44. 1 kHz (recording/playback) 32 kHz (recording/playback) Emphasis : 50 µsec. /15 µsec (automatically applied in the Play mode) Frequency Response : 20 ­ 20 kHz ± 0. 5 dB (48 kHz/44. 1 kHz) 20 ­ 14. 5 kHz ± 0. 8 dB (32 kHz) S/N : More than 89 dB Dynamic Range : More than 89 dB Total Harmonic Distortion : Less than 0. 007% (SP), less than 0. 07% (LP) (1 kHz for recording and playback, full-scale) Channel Separation : More than 85 dB (1 kHz) Wow and Flutter : Unmeasurable (less than ±0. 001%) Analog Input/Output Connectors IN : RCA pin x 2 Normal Input Level : ­10 dBV (0. 3 V), unbalanced (FS ­ 16 dB) Input Impedance : 20 kohms OUT : RCA pin x 4 Normal Output Level : ­10 dBV (0. 3 V), unbalanced (FS ­ 16 dB) Maximum Output Level : +6 dBV (2. 0 V), unbalanced (10-kohm load) Output impedance : Less than 1 kohm CASCADE OUTPUT : RCA pin x 2 Normal Output Level : ­10 dBV (0. 3 V), unbalanced (FS ­ 16 dB) Maximum Output Level : +6 dBV (2. 0 V), unbalanced (10-kohm load) Output impedance : Less than 1 kohm PHONES: 6. 3 mm dia. [. . . ]