User manual TASCAM CD-RW4U QUICK START

[. . . ] Use the INPUT SELECT on the main unit (not the remote control unit) to choose between Analog In and Coaxial In. start recording a track automatically when the source material starts?Once the input level goes over the trigger level set up in the menu, the CD-RW4U starts recording. When a recordable disc is in the drive, press the DISPLAY key on the remote control unit until the display shows TOTAL REMAIN and the amount of time available for recording. [. . . ] Exit the menu system by pressing the MULTI DIAL or pressing the ENTER key (remote control unit). Menu A_TRACK Auto track division when recording S_LVL Trigger level for track division COPY ID SCMS copy-protection FADE IN Time taken to fade in when recording FADE OUT Tame taken to fade out when recording PWR SAVE Switches unit to standby mode if left unattended for five minutes Meaning OFF, ON MIN L, DD, -24, -30, -36, -42, -48, -54, -60, -66, -72 (dB) FREE, 1GEN, PROH 1 through 24 seconds 1 through 24 seconds ON, OFF Values Playback 1 2 3 4 5 1 2 3 4 5 CD-RW4U Quick Start Guide Insert the disc (use the OPEN/CLOSE key). Select a track for playback by turning the MULTI DIAL (main unit) or using the SKIP keys (remote control unit). Start playback by pressing the PLAY/PAUSE key (main unit) or the PLAY key (remote control unit). Pause playback with the PLAY/PAUSE key (main unit) or the PAUSE key (remote control unit). Stop playback with the STOP key (main or remote control unit). Programmed playback 1 2 3 4 5 Press the PLAY MODE key (remote control unit) until the display shows Program. Use the MULTI DIAL (main unit) or SKIP keys (remote control unit) to select a program step. Start playback (PLAY/PAUSE or PLAY). Recording 1 2 3 6 4 5 7 1 2 3 Insert a recordable disc. If you selected the analog input jacks, you can adjust the input level with the INPUT control knob (main unit). Press the PLAY/PAUSE (main unit) or PLAY key (remote control unit) to start recording. Enter track divisions "on-the-fly" by pressing RECORD (either the main unit or remote control unit). Press FINALIZE (main unit), followed by pressing the MULTI DIAL (main unit) or the ENTER key (remote control unit). 8 4 5 6 7 8 Quick Start Guide Safety precautions · CD-RW4U Although some of these precautions may seem obvious, we strongly suggest that you read and take note of them in order to avoid any possible trouble with your CD-RW4U. Read the manual to find out what's there and what the CD-RW4U can do, follow the instructions in the manual, and take note of the notes and warnings. If the unit needs to be cleaned, disconnect it from the power supply first. Use a damp cloth for cleaning, and avoid using liquid cleaners or aerosol cleaners. Use of any other accessories or attachments may prove dangerous, to you and the unit. Since this technology is moving forward rapidly, we suggest that you visit the TASCAM Web site (http://www. tascam. com) for up-to-date details of what media are supported. [. . . ] If the plug supplied with this unit is polarized (one blade of the plug is wide than the other) do not attempt to fit the plug the wrong way round into an outlet. If the plug will not fit into the outlet, consult a qualified electrician to change the outlet. We suggest unplugging the unit from the power supply during electrical storms, or when it will not be used for a long time. [. . . ]