User manual TASCAM CD-RW402 annexe 1

[. . . ] · Avoid very hot, very cold or very humid locations for the CD-RW402. · If possible, make the area where you work with the CD-RW402 into a smoke-free zone. [. . . ] Press the MULTI DIAL to confirm the setting. 5 Press the MULTI DIAL to start the copy process. COPY START ? 6 After a brief standby period, the lead-in is Lead In 1:12 101 1:56 LeadOut 0:23 COMPARE21:45 written, the copy process continues, and the time so far (at normal speed) is shown. If you have selected the compare option, the discs will be compared following the finalizaison. TOC EDIT 1 When an audio disc is in drive 1, it is possiTOC EDIT ? ble to edit the TOC so that tracks are joined, split or removed, and the start and end times of tracks can be shifted. This applies only to the TOC, not the material actually recorded on the disc. With the drive in play or ready mode, press MENU (1), turn the MULTI DIAL to display TOC EDIT ?, and press the MULTI DIAL. TASCAM CD-RW402 Quick Start guide 2 Turn the MULTI DIAL to select the TOC editTOC EDIT Track 2 DIVIDE Track 2 Track 3 ing options, and push it to carry out the operation. Sometimes you may need to confirm the operation by pressing the MULTI DIAL again. 3 Divide a track into two at the current position. 4 Combine two tracks. Track 5 Track 6 COMBINE Track 5 5 Erase a track from the TOC Track 9 Track 10 Track 11 ERASE TRACK Track 9 Track 10 6 Move the start of the track or the end of the Track 5 StartPt SET Track 5 track to the current playback position. Track 5 End Pt SET Track 5 ALL CANCEL? 7 Return the disc to "normal" by ejecting it, or the ALL CANCEL menu option (when the drive is stopped. Analog and digital source volume 1 When recording from an outside source on drive 2, use the INPUT SELECTOR to choose between the digital COAXIAL or OPTICAL connectors, the ANALOG connectors, or INTERNAL (drive 1). 2 Adjust the level of analog signals (and their balance) using the INPUT and BALANCE controls. 3 Use the REC MENU 1 menu to select the digital volume to set the level of all signals (analog post-step 2, and digital). Adjust the level between -60 and +18 dB (there is also an "off" setting, shown by ---). REC MENU 1 DIG VOLUME TASCAM CD-RW402 Quick Start guide How do I. . . ? restart playback from the point where I last started?This will locate the playback position from which playback last started, and enter ready mode. On either drive, with the drive in play or play ready mode, press the appropriate JOG key. While monitoring, use the MULTI DIAL to jog a loop backwards and forwards to frame accuracy. You can set the playback position to the first sound in a track (as opposed to the track division) using the Auto Cue and Auto Ready functions (menu items). [. . . ] On a finalized disc, you have the option of "unfinalizing" it. Simply put the finalized disc into drive 2, press the ERASE key, turn the MULTI DIAL until the display shows UNFINALIZE? [. . . ]