User manual TASCAM CD-A500

[. . . ] » CD-A500 D 3D0017100A Compact Disc Player/Reverse Cassette Deck Ü ÿ Y This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NEDERLANDS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] The REPEAT and A - indicators light and the B indicator blinks to show that point A has been entered. 2. Tracks will be randomly selected and played back. To repeat one tune (Single Repeat mode) 1. The REPEAT and SINGLE indicators light. O Press the Æ button with the random play function engaged to select a tune at random. Press the Ú button to replay the currently played tune from its beginning. O To release the random play function while it is engaged, press the SHUFFLE button again. Tunes will play back in their normal designated order, starting from the currently played tune. 3. When the portion at which repeat playback should end is reached, press the A-B button again to designate point B. The B indicator is changed to light steadily to show that the A-B repeat function has been activated. When play reaches point B, the player returns to point A and starts playback again, repeatedly. O After designating point A, when quick searching point B, use the Ò or Æ button instead of playing back normally. O When the A-B button is pressed again during block repeat play, block repeat playback will be released. 2. The selected tune is played, then when the end of the tune is reached, the player will return to the beginning of the tune and playback starts again. In this way, the selected tune will be played back repeatedly. To repeat an entire disc (All Repeat mode) 1. Playback starts and, when the end of the disc is reached, the player will return to the beginning of the first tune, and then playback continues repeatedly. Programmed repeat playback The repeat function can be activated even in the Programmed Playback mode. To repeat all the programmed tunes, press the REPEAT 1/ALL button twice. (At this time, check that the REPEAT and ALL indicators light. ) _9_ Time Counter Display The time counter shows various time readouts, as follows. Auto Spacing When this function is activated, an interval of approx. 4 seconds will be inserted between tunes automatically, so they are played back with a fixed spacing. To activate this, press the AUTO SPACE button so that the A. SPACE indicator lights in the display. When the AUTO SPACE button is pressed again, the indicator goes off and the auto spacing function is released. Single Playback 1. Press the Ú/Æ SKIP buttons corresponding to the required tune. A single tune will be played back, after which the player will enter the stop mode. O To release the Single mode, press the SINGLE button again. 1 Total disc playback time After the disc tray is closed with a disc loaded, the total disc playback time and total number of tunes on the disc are displayed. [. . . ] If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not provided with a mains plug, or one has to be fitted, then follow the instructions given below: IMPORTANT. DO NOT make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol ç or coloured GREEN or GREEN-and-YELLOW. The wires in the mains lead on this product are coloured in accordance with the following code: BLUE: NEUTRAL BROWN: LIVE As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. [. . . ]