User manual TASCAM CD-200I

[. . . ] D01086320A CD-200i CD Player/iPod Dock OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. [. . . ] Press and hold to search a track. 08 OPEN/CLOSE key (CD) Use to open and close the disc tray. PROGRAM EDIT key (CD) q8 When the output source is set to CD, use this to make, confirm and edit program settings. (See "Programmed playback" on page 25. ) REPEAT key (CD and iPod) w8 Press this key to cycle through the repeat playback modes in the following order: PITCH +/­ keys (CD) e8 Use these keys to set the pitch control value. (See "Pitch control" on page 29. ) STOP key (CD and iPod) r8 When the output source is set to CD, press this key to stop playback. When the output source is set to iPod, press this key to pause playback. When playback is stopped or paused, press to start playback. 14 TASCAM CD-200i 3 - Preparation for Use Before connecting other devices, read their operation manuals and connect them properly. Connect the power last. Connecting audio and video devices ANALOG IN DIGITAL IN DIGITAL IN VIDEO IN S-VIDEO IN Mixer, Recorder, Amplifier, or other device Digital mixer, digital recorder, digital amplifier, or other device Video equipment such as TV or monitor ª Connecting analog audio devices Connect the analog output jacks of this unit to the input jacks of a stereo amplifier, mixer, recorder or other device with analog inputs. CAUTION · · This unit's digital output during MP3 and WAV file playback has a sampling frequency of 44. 1 kHz. During playback of MP3 and WAV files on audio CDs, digital output is possible when the pitch control function is in use, but the sampling frequency is changed by an amount equivalent to the pitch control value. When the pitch control function is on, some devices might not be able to accept signals from the digital outputs of this unit. · · Cables are not included with this unit. Doing so could cause reduced audio quality or noise. ª Connecting digital audio devices Connect a digital output jack (coaxial or optical) of this unit to the input jack of a stereo amplifier, mixer, recorder or other device with a digital input. ª Connecting video devices Connect the VIDEO or S-VIDEO output jack of this unit to the video input jack of a television or other video device. The iPod playback sound signal and signals input through the AUX IN jacks can only be output as analog signals. They cannot be output as digital signals. Please change the iPod's TV signal setting (NTSC or PAL) and TV Screen (or Widescreen) setting to suit the connected device. TASCAM CD-200i 15 3 - Preparation for Use Connecting an iPod Connecting an iPod with the iPod dock on the front panel allows the unit to output the sound of music and video playback from the iPod, as well as to control and recharge the iPod. Always attach a dock adapter suitable for your iPod to the connector. Use the dock adapter included with your iPod or a commercially available Apple iPod Universal Dock Adapter made by Apple Inc. CAUTION iPod Dock adapter Dock connector · When an iPod is inserted into this unit's iPod dock, the top of the iPod is higher than the top of the unit. Leave 2U (10 cm) or more space open about the unit to prevent interference with devices installed above it. This unit is compatible with iPod's equipped with fourth generation or later Dock connectors. iPod shuffles do not have dock connectors, so they cannot be used with the dock. They can, however, be connected using the AUX IN jack (see "Connecting external audio players" on page 18). Connecting with a case on might prevent complete connection and proper operation and playback. Always use an adapter that is suitable for the iPod that you are using. The use of an unsuitable adapter could damage the connectors of both devices. · · · · When an iPod is connected to this unit's iPod dock, it will be recharged whenever this unit's power is ON. When the unit's power is OFF, it does not charge connected iPods. During charging, a battery icon appears on the iPod screen that shows the charging status. Please see the operation manual for the iPod that you are using for details. 16 TASCAM CD-200i 3 - Preparation for Use Opening the iPod dock Press the center of the iPod dock, where it says "PUSH OPEN" to open the dock, and then pull it out. Pull the iPod dock completely out until it locks into place before using it Closing the iPod dock Remove the iPod, and then press the panel while pressing and holding the CLOSE button. Removing a dock adapter Locked position of dock after it is pulled out As shown in the illustration below, insert a flathead screwdriver into the hole in the dock adapter and then use the driver to remove the adapter. CAUTION · · CAUTION When removing the dock adapter, use a hand to hold the iPod dock in place. Do not move the iPod dock left, right, up or down when it is pulled out. · · Do not move the iPod dock left, right, up or down when it is pulled out. [. . . ] There is no artist data or no file data that can be displayed There is no title data that can be displayed. The output source is set to AUX. Response Load a disc that has MP3 or WAV files. Text information must be 7-bit ASCII compatible text to be displayed. Connect an iPod. Warning messages If an operation cannot be completed, one of the following messages is shown. It will appear for about two seconds before disappearing automatically. [. . . ]