User manual TASCAM CD-150

[. . . ] 9A07483800 » Compact Disc Player Ü ÿ Y This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NEDERLANDS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Press the  button to replay currently played track from its beginning. To release the random play function while it is engaged, press the STOP (ª) button, then press the RANDOM button. ENGLISH Auto Cue 1. The AUTO CUE indicator will light, and AUTO CUE function is activated. To cue to the first track on the disc, press the PLAY (Á) button. The player will automatically search the beginning of the first track, and enters the ready mode. To select a track other than the first track, enter the desired track number using the numeric buttons on the unit or the remote control. The player will automatically search to the beginning of the track selected, and enter the ready mode. Press the PLAY (Á) button to begin playback of the selected track. When the SKIP button (Â/¯) is pressed while the AUTO CUE function is activated, the player will skip to the beginning of the new desired track and enter the ready mode. Press the PLAY (Á) button to begin playback of the new desired track. 3. Several seconds later, the following information is displayed and the player enters the standby mode. Total number of tracks on the disc Even if the disc tray is open. . . . When the Á button is pressed: The disc tray will close and playback starts from the first track. Direct access play: Press the numeric buttons corresponding to the required track. The player starts from the specified track directly. The Music Calendar then lights, displaying track numbers up to 20. Disc playback starts from the first track, and the Á(play) indicator will light. If the total track number exceeds 20 (OVER blinks), the track number should be confirmed on the TRACK display. During playback, the number of the currently played track blinks on the Music Calendar. When tracks have been played, their numbers will disappear from the Music Calendar display. Example 1: To play the 5th track: Press . CAUTION: Do not force the tray by hand during opening and closing operations. Do not leave the disc tray open when the player is not in use to prevent dirt and dust from entering the mechanism. Pitch Control Press the PITCH CONTROL button in the stop mode. To check the playing time: Press the TIME button. Random Playback This function is possible only when the player is in the stop mode. Turning left makes playback speed slower within the range O ~ ­6%. 3. Press the numeric buttons in the following order; Press the OPEN/CLOSE (ø) button once, and the program memory will be cleared. [. . . ] When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones. Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire. ­ 10 ­ Specifications CD PLAYER Disc: 8-cm/12-cm CD Audio Channel: 2 channels Quantization: 16-bit linear Sampling Frequency: 44. 1 kHz Analog Output (RCA) Nominal output level: ­10 dBV (load impedance 10 kohms, unbalanced) Maximum output level: +6 dBV (2 Vrms) Output impedance: 2. 5 kohms Headphone Output (standard stereo phone jack): 11 mW at max. (load impedance 32 ohms) Frequency Response: 20 Hz ­ 20 kHz ±1. 5dB Signal-to-Noise Ratio (S/N): >85 dB (1 kHz) Total Harmonic Distortion: < 0. 02 % (1 kHz) Channel Separation: >80 dB (1 kHz) Pitch Control: ±6 % Auto Cue Level: ­60 dB GENERAL Power Requirements: 120 VAC, 60 Hz (U. S. A. / Canada Model) 230 VAC, 50Hz (UK/Europe Model) 240 VAC, 50Hz (Australia Model) Power Consumption: 9 Watts (AC) Dimensions (W x H x D): 482 x104 x304 mm (19" x 4-1/8" x 11-15/16") Net Weight: 4. 4 kg (9. 7 Ibs. ) Standard Accessories: Wireless Remote Control Unit (RC-150C), Battery (SUM-3, "AA", "R6" type) x 2, Rack Mounting Screw Kit, RCA Pin-plug Cord Improvements may result in specification or feature changes without notice. [. . . ]