User manual TASCAM CD-01U

[. . . ] » CD PLAYER OWNER'S MANUAL D00864010A CD-01 U /CD-01UPro Important Safety Precautions O CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. [. . . ] Menu Parameter 4 Use the PITCH knob on the front panel or PREV/NEXT keys on the remote control to select the setting value. 5 Press the PITCH knob on the front panel or ENTER key on the remote control. Pressing the DISPLAY key on either the front panel or the remote control exits the menu mode. 2 Use the PITCH knob on the front panel, or PREV/NEXT keys or number keys on the remote control to select the menu item. 3 Press the PITCH knob on the front panel or ENTER key on the remote control. 14 TASCAM CD-01U/CD-01U Pro 6 - Playback Discs for playback The CD-01U/ CD-01U Pro can playback the types of discs listed below. Ordinary audio CDs available commercially (recorded in CD-DA format). CD-R and CD-RW discs recorded in CD-DA format, and properly finalized. MP3 files recorded in ISO9660 format on CD-R and CD-RW discs, and properly finalized. Make sure the disc has been properly finalized before loading into the player. About finalization Even if audio data is recorded onto a CD-R/RW disc, if the TOC (table of contents corresponding to the recorded data) is not written on the disc after recording, the disc cannot be played back on conventional CD players. A number of record companies have released titles on copy control CD discs as a means of protecting artist copyrights. Some of these discs do not comply with standard CD format specifications, and may not be able to be played on this unit. The CD-01U/CD-01U Pro can play back MP3 files recorded in formats which conform to ISO9660 level 1, level 2 and Joliet. For MP3 CDs CDs containing MP3 files can be played by the CD01U/CD-01U Pro with the following limitations on the number of files and directories. Maximum number of directories: 254 Maximum number of MP3 files: 255 File format: MPEG 1 audio layer 3 Bit rate: 32kbps to 320kbps Sampling frequency: 44. 1KHz, Stereo File extension: mp3, Mp3, mP3, MP3 MP3 files are played as the order in the following diagram. In this manner, playback is performed from the top level directories. The CD-01U/CD-01U Pro can only read the files in the first session of a multi-session disc. ID3 tag display for MP3 playback is not supported. : Folder (Directory) : MP3 File TASCAM CD-01U/CD-01UPro 15 6 - Playback Playback modes There are four different playback modes. Normal (continuous) playback mode: no indication lamp Single playback mode: S is lit Program playback mode: PGM is lit Random playback mode: RANDOM is lit The playback mode can be selected using the PLAY MODE key on the remote control. Pressing the key changes the playback mode in the following order: Cont Single Program Random You can also select the playback mode pressing the CALL/PLAY MODE key on the front panel when in SHIFT mode. While the mode can be changed from any playback mode, the explanation in this manual will assume the user is starting from the normal Continuous mode. Basic playback operation 1 Push the POWER switch to turn on the unit. After a disc is inserted, the total playing time and number of tracks will be displayed. Do not force the disc into the slot, the CD-01U/CD01U Pro will pull the disc when partially inserted. To stop playback, press the ª key on the front panel or remote control unit. The indication will blink, and the unit will enter playback standby mode. To remove the disc Press the EJECT key on either the front panel or remote control unit. You can insert back a disc into the slot by pressing the EJECT key or pull the disc and slot it in again. When Eject Block is activated, EJECT key cannot be used when disc is being played back. [. . . ] Refer to the diagrams, and connect the first CD01U's RELAY OUT to the second CD-01U's RELAY IN, the second CD-01U's RELAY OUT to the third CD-01U's RELAY IN, and so on. Finally, connect the last CD-01U's RELAY OUT to the first CD-01U's RELAY IN. Switch on power to all the CD-01Us. RELAY IN RELAY OUT RELAY IN RELAY OUT RELAY OUT RELAY IN RELAY IN RELAY OUT RELAY IN 22 TASCAM CD-01U/CD-01UPro 7 - Advanced operations Time display switching During audio CD playback (or playback standby), when the DISPLAY key on either the front panel or the remote control is pressed, the time display will switch through several modes in the following order. Elapsed track time (no display light indication) Remaining track time (REMAIN is lit in the display) Remaining disc time (T. [. . . ]