User manual TARGUS USB 2.0 LATPOP DOCKING STATION

[. . . ] 2 Connect one end of the USB cable to the docking station and the other end into an available USB 2. Lock loop Standard lock slot Right side AC adapter Left side Green Tx light illuminates when connected to a network and the yellow Rx light flashes when data is transmitting to or from the network. [. . . ] 0 Laptop Docking Station with Video Off: You are using your notebook screen as your primary display and your monitor or LCD is turned off. Docking Station's video setting can also be configured from the Windows Display Properties dialog box. To do this on Windows Vista, right click on the desktop, click on "Personalize" and then select the `Display Settings' link. Extend Mode: To set the display into this mode, check the box marked `Extend my Windows desktop onto this monitor' (1 in Figure 1). Arrange screen resolution and colour quality using the appropriate controls (2 and 3), and arrange its position with respect to the other monitors on the extended desktop in using the drag area (4). 0 Laptop Docking Station with Video Mirror Mode: To set the display into mirror mode, simply uncheck the box marked `Extend the desktop onto this monitor' (1 in Figure 1 on previous page. Setting the Primary Display: To make the monitor attached to the Docking Station as the primary display, follow the instructions below: In Display Properties window, using the drop down list, select the monitor that is attached to the Docking Station. After selecting the corresponding monitor, check the box next to "extend the desktop onto this monitor" (for Vista) or "extend my Windows desktop onto this monitor" (for XP). Then, check the box next to "This is my main monitor" (for Vista) " Use this device as the primary monitor" (for XP). Select the Laptop monitor using the drop down list and uncheck the box "extend the desktop onto this monitor" (for Vista) or " Extend my Windows desktop onto this monitor" (for XP) and click "Apply" Upon reconnection, the monitor attached to the Docking Station will return to primary mode. If the Docking Station is powered off or the USB cable is removed from the computer, the display blanks. However, windows and icons that were previously on the screen will not be moved back. [. . . ] You can view the devices installed on the docking station from the Device Manager window in System Properties. Right-click My Computer, Properties, then click the Hardware tab, and then the Device Manager button. [. . . ]