User manual TARGUS ERGO D-PRO

[. . . ] Congratulations on your purchase of the Targus Ergo D-Pro Desktop Stand for Notebooks. [. . . ] 3 Use the knobs to position the PRM after determining the proper position to attach the docking station according to the outlining instructions below. Refer to the instructions for your model of docking station: IBM Thinkpad Dock ll: Line up the holes on the back of your docking station with the holes on the back of the PRM at (D). HP DC 367B port replicator: Line up the top of your port replicator with the indication lines on the PRM at (E). Toshiba Advanced port replicator ll and lll: Line up the top of your port replicator with the indication lines on the PRM at (F). Port Replicator Module (PRM) The position where the docking station is to be attached to the PRM is now determined. If you have used the screw rivets to secure your docking station, your installation is complete once you secure the PRM to the D-Pro. With the front of the notebook resting on (B), carefully and firmly push the Docking station onto the PRM and hold for at least 20 seconds. 2 The docking station is now attached to the PRM and the notebook screen should be positioned at the centre of the D-Pro. [. . . ] At the end of this product's useful life please dispose at an appropriate recycling collection point provided in your country. [. . . ]