User manual TARGUS 4-PORT

[. . . ] If the cable connector does not attach smoothly, turn the connector over and try attaching it again. To connect a USB device, plug it into a USB port on the docking station and follow the additional instructions provided with the device. all four USB ports meet USB hi-speed requirements by providing 480Mbps through-put and 500mA of power. [. . . ] The black USB power ports are high-speed ports that provide up to 1Amp. The sound and mic should come out automatically when you plug the docking station. To manually enable your headphones or speakers in case automatic transfer is not possible 0 Laptop Docking Station with Video For Windows XP Go to the Control Panel and choose Sound and Audio. Under Sound Playback, change Preferred Device to USB Multimedia Audio Device from the drop down list. Video menu options can be accessed by right-clicking on the Docking Station icon in the system tray or through the Windows Display Properties. 0 Laptop Docking Station with Video Extend: You are using your notebook screen as your primary display and your monitor or LCD is a secondary screen. to set the display into this mode , select `Extend' in the Docking Station Icon application menu. The device will now be extending in the direction it was the last time the display was in this mode. For more control, navigating to the `Extend To' submenu and selecting one of the options will not only put the device into extend mode, but will also place it to the Left/Right/Above/ Below the main (primary) monitor. Some devices, which use large amounts of power, such as printers and optical drives, should be plugged into the USB Power Ports. These ports will provide up to 1000mA of power - double the power on standard USB ports. Actual support resolutions area depend on the support of connected monitor. Make sure that the device is fully inserted into the correct port on the docking station. If it still doesn't work, test the device by connecting it directly to your computer. For more information refer to "Verifying Devices are Installed" · Disconnect all devices from the docking station and reconnect them, one at a time. Should a USB device draw more current than the USB port can supply, the port will shut down. to re-enable the port , unplug the device and go to Device Manager or to the message in the system tray and choose the Reset option. Some devices may halt temporarily when a high data transfer is occurring. [. . . ] Some devices may halt temporarily when a high data transfer is occurring. For example, your mouse may respond slowly while a graphic print job is printing or while you are experiencing heavy network traffic. we recommend the following guidelines: · Do not transfer data to or from multiple high-speed devices, such as a digital camera or scanner, at the same time. [. . . ]