User manual TANITA BC-351

[. . . ] Important Notes for Users This Body fat monitor is intended for adults and children (ages 5-17) with inactive to moderately active lifestyles and adults with athletic body types. Tanita’s athlete definition includes “lifetime of fitness” individuals who have been fit for years but currently exercise less than 10 hours per week. The body fat monitor function is not intended for pregnant women, professional athletes or bodybuilders. Recorded data may be lost if the unit is used incorrectly or is exposed to electrical power surges. [. . . ] T Do not use the carpet feet on hard, flat surface as the unit may chip over. 4” (10 mm) Switching the weight mode Note : For use only with models containing the weight mode switch You can switch the unit indication by using the switch on the back of the scale as shown in the figure. Note: f weight mode is set to pounds or stone-pounds, the height programming mode I will be automatically set to feet and inches. To keep the unit in the best condition, follow these instructions carefully: • Do not attempt to disassemble the measuring platform. € Store the unit horizontally, and place it so that the buttons will not be pressed accidentally. € Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid soaps. € Do not use this scale while operation transmitters (such as a cell phone) as this may affect your results.   Setting and storing personal data in memory You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode. (Release the key within 3 seconds or the display will show “Error”. 0” appears the display will show I “Error” and you will not obtain a reading. Furthermore, if you do not step onto the measuring platform within about 30 seconds after “0. Turn on the Power Press the Set button to turn on the unit (once programmed, tapping a Personal Key turns on the unit. ) The unit will beep to confirm activation, the Personal Key numbers (1, 2, 3, 4) will be displayed, and the display will flash. Note: f you don’t operate the unit for sixty seconds after the unit has been turned on, the I unit will turn off automatically. Note: f you make a mistake or want to turn the unit off before you have finished programming it, press the I Weight-Only Key ( ) to force quit. Once you reach the Personal Key number you wish to use, press the Set button. €00000” will appear on the display and disappear one by one from left to right. Your Body Fat percentage (%FAT) and Body Fat Range will appear on the display screen. After your body fat percentage has been calculated, a black bar will flash along the bottom of the display, identifying where you fall within the Body Fat Ranges for your age and gender. D To see other readings, Carefully step off scale, press other feature keys. To see other readings press each feature key while weight & Body Fat % is displayed. [. . . ] 0” appears the display will show “Error” and I you will not obtain a reading. Taking weight measurement only Select Weight-Only Key Press the Weight-only key. If you remain on the platform, the display will flash for about 30 seconds, and then the power will automatically turn off. If you step off the platform, the weight will continue to show for about 5 seconds, then “0. [. . . ]