User manual TALLYGENICOM MIP480

[. . . ] Mobile Impact Printer 480 User's Manual GEK-04006 GEK-04006 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Canadian Compliance Statement This digital apparatus is in conformity with standard NMB-003 of Canada. Cet appareil numérique est conforme à la norme NMB-003 du Canada. Radio and Television Interference When installed at a certain location, the machine may cause interference with radio and television reception. If you notice flickering or distorted images or noises on your audio-visual units, your machine maybe causing radio interference. [. . . ] To set Adjustment value: 1) The format of adjustment of setting of the first dot Position on the left side is printed as below, 15 patterns of adjustment Position are printed. 01H 02H 03H 04H 05H 06H 07H 08H 09H 10H 11H 12H 13H 14H 10/60 15H 1st Print Position xx 4-27 Using Set-Up Mode 2) After the format of setting of the first dot Position on the left side is printed, the paper is automatically advanced for viewing after the printing is complete. 3) Press NEXT and PREVIOUS Key to choose the new first dot position on the left side. The adjustment range is "01-15", and the center value is "08". Printing new value By pressing SETUP/EXIT Key, the adjustment value for the first dot position on the left side is determined and the adjustment value is saved. The new adjustment value of the first dot position on the left side is printed. The paper is automatically advanced for viewing after the printing is complete. After ejecting a paper, the message" 1st Print Position = xx" is printed. 1st Print Position xx . . . 1st Print Position yy Note) "yy" is New adjustment value 4. Exit the setting of the first dot position on the left side mode Turn the printer off to exit this mode. 4-28 Using Set-Up Mode Changing Menu Access Options You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-Up options. MENU ACCESS Option and Values · Overprinted values are the factory settings. MENU ACCESS Options <MENU-ACCES> Values Description Specify the type of access to the Set-Up functions from the control panel or from the <FUNCTIONS> menu. READY, PARK and LOAD require the ALT key to be used as a two key operation for these functions. Note: You can return to the All Functions Accessible mode by turning the printer on while pressing the ALT, PARK and LOAD buttons at the same time. The printer enters the Set-Up mode with this operation. ALL FUNC MACRO ONLY NO ACCESS SAFE PANEL 1. To enter Menu Access mode: 1) Make sure that the tractors are loaded with continuous feedpaper and that the paper select lever is set forward. 3) Turn the printer back on while pressing the "LOAD/FF" + "PARK" + "ALT" buttons. Note: Do not press any buttons alone or in combination except for pressing the LOAD, PARK and ALT buttons alone when turning the printer on, to avoid initiating unexpected tests not permitted for the user. 2. To change Menu Access Option and values 1) Press the NEXT( LOAD/FF) button to move to next option; 2) Press the PREVIOUS( PARK) button to move to previous option; 3) Press the ALT-NEXT buttons to select the Option or value and move down; 4) Press the ALT-PREVIOUS buttons to select the Option or value and move up; 5) Press SETUP/EXIT key to save the value and move to SAVE&EXIT menu; 4-29 Using Set-Up Mode 3. Exit the Menu Access mode Turn the printer off to exit the Menu Access mode. 4-30 Using Set-Up Mode Setting Setup Mode to Default Value (Standard) This function can initialize the printer to Standard default. To enter setting setup mode to default value(standard): 1) Turn the printer off. 2) Turn the printer back on while pressing the "PARK" + "READY/CLEAR" buttons. Note: Do not press any buttons alone or in combination except for pressing the PARK and READY/CLEAR buttons alone when turning the printer on, to avoid initiating unexpected tests not permitted for the user. 2. Exit the setting setup mode to default value(standard): After the setting completes, the printer will automatically restart in the power-up state. Setting Setup Mode to Default Value (6820 Mode) This function can initialize the printer to 6820 mode default. To enter setting setup mode to default value(6820 mode): 1) Turn the printer off. [. . . ] "Offline" indicates that the printer is not "online" with the computer. Online GL-3 Glossary When the printer is online, it is ready to receive or is receiving commands from the computer. The printer must be online to print. Parallel Interface A standard computer interface. Information is transferred between devices over separate wires, allowing all of the bits that make up the character to be transmitted simultaneously (in parallel). Park Position The position in which continuous forms paper is retracted or "parked" on the rear forms tractors. When continuous forms paper is loaded, it moves forward from the park position to the platen. Permanent Memory Memory that retains information even when power is turned off. [. . . ]