User manual SYNQ AUDIO RESEARCH USB 2.2 V1.0

[. . . ] Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Check the contents: Check that the carton contains the following items: Main unit Control unit Operating instructions 2 cinch cords 1 mini-DIN8 cable 1m 2 fader start cables 1 power cord Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. This appliance meets the requirements of the current European and national guidelines. [. . . ] Player 1 now plays tracks, randomly selected from the complete USB-mass storage. While player 1 is playing in random mode, player 2 can still be used to play any track you like. Directory random: you can choose to play only tracks from a certain directory: first you have to select this directory, then press the RELAY button for +/-2seconds until the LED starts blinking. (avoids mix-up of 2 completely different music styles: perfect for bars, clubs, restaurants, . CD random: first put 2 CDs in the unit, now press the RELAY-button shortly: alternately a track will be played from both CDs until the relay function is disengaged. You can always put a new CD in the player that is waiting in standby mode. Load a track from USB-drive: when the DATABASE/NEXT TRACK-button (10) is used to lookup the next track, just press the LOAD TRACK button to load the selected track. You can only select another source while the player is in stop or pause. TIME Button: has different functions: Change time display: The TIME button switches between elapsed playing time, remaining time in a selection and total remaining time of the disc. SGL/CTN: You can choose between "single track mode" and "continuous play". Continuous play: the complete CD/USB-drive will be played without interruption. (mostly used in pubs) Single track: player stops at the end of each track and waits at the beginning of the next track. (mostly used by deejays) Push the SGL/CNT button for more than 1second to switch between normal and "auto cue" mode. In "auto cue" mode the player waits at the first music note of each track. This means that badly indexed CDs will not interfere with the instant start capabilities of this player. To enter the SETUP menu, press the TIME button (19) of the left player for about 3seconds. Use the TRACK knob (9) to browse the different menu options of the main menu. To save your settings: choose menu option 6 (EXIT & SAVE) and press the TRACK knob (9) 22. FADER START Sockets: If you are using a mixer with fader start function, connect the player with the fader start of the mixer. Please note that these sockets must never be connected with any voltage. CONTROL connector: connect this connector to the main unit, using the supplied mini-DIN8 cable. = +20: highest sensitivity Press the TRACK knob (9) to save the new value and return to the main menu. [. . . ] 2 detects these CD-TEXT data, the display will show them automatically. pLAYING/RECORDING CD-R and CD-RW: Apart from normal audio CD's the USB2. Please note that you should always use the "disc at once" and "track at once" disc writing options!2 is capable of reading CD-R and CD-RW recorded at higher speeds, we suggest not using recording speeds more than x12 to increase readability. [. . . ]