User manual SYLVANIA WLTR13G

[. . . ] ATTACHMENTS - Do not use attachments not recommended by the TV manufacturer as they may cause hazards. WATER AND MOISTURE - Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. ACCESSORIES - Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. [. . . ] , between antenna and CATV) or if you move the TV to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan. Use [Cursor K/L] to select "CHANNEL SETUP", then press [ENTER]. CHANNEL SETUP You can automatically scan the viewable channels and remove those that are undesired. LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. CAPTION You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. DTVCC In addition to the basic closed caption described on page 19, DTV has its own closed caption called DTVCC. Use [Cursor K/L] to select your desired preset type, then press [ENTER]. When the scanning and memorizing are completed, the lowest memorized channel will be displayed. When you selected "AUTO PRESET CH(TV/DTV)", the lowest memorized analog channel will be displayed when the scanning and memorizing are completed. If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. When no channel can be received by auto channel scan, "NO TV SIGNALS" will be displayed on the TV screen. The information display will automatically disappear in a few seconds when the closed caption is on. The sleep timer can be set to automatically turn off the unit after an incremental period of time. 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal. [ZOOM] Enlarge and display the center area of the digitalsupported program. You can set your unit to turn off after a set period of time (from 30 to 120 minutes). After set up, the sleep timer display can be called up for checking by pressing [SLEEP]. When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled. The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. In the digital mode (DTV), you can add or delete channels only for major channel. Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. Use [Cursor K/L] to select "ADD/DELETE(DTV)" or "ADD/DELETE", then press [ENTER]. [. . . ] Occasionally a few non active pixels may appear as a fixed point of blue, green or red. Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more details on correct operations. Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. [. . . ]