User manual SYLVANIA SRV202

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [. . . ] You can display the currently selected channel or other information such as the audio mode on the TV screen. In the analog mode, the current channel number and the audio mode are displayed. The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen. A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. Department stores and supermarket were ) 4 channel number 5 audio language (Refer to "Switching Audio Mode" on page 15. When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll. â· While the program guide is displayed, the closed caption function is interrupted. 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. This function lets you check the digital signal strength of each channel. 4 Use [the Number buttons] or [CH K/L] to select the 4 Use [the Number buttons] to enter the number of the Channel you want to add, then press [ENTER]. If external input is used, it is not possible to register the channel and "Unavailable" will be displayed on the TV screen. â· By using [CH K/ L], you can select the memorized channels only. You can choose English, Spanish, or French as your on-screen language. If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use [Cursor K / L] to select "IDIOMA" or "LANGUE", then press [ENTER]. Use [Cursor K / L] to select "Reset", then press [ENTER] to restore "Picture Mode" settings to the default. This function resets the "Dynamic" setting for Picture Mode to factory default. When this unit is connected to PC or DVI devices, you cannot select "Sharpness". Use [Cursor K / L] to select "Reset", then press [ENTER] to restore "Sound" settings to the default. [. . . ] â· Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more details on correct operations. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height). Component Video This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. [. . . ]