User manual SYLVANIA NB530SLX

[. . . ] Press the button on the TV's remote control that accesses the external input channel repeatedly until you see this player's opening picture. If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up. Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched. High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility. [. . . ] 2 Use [K / L] to select a track / file, then press During program playback, press [STOP C] once to set the resume point, and then press [PLAY B] to resume program playback from where [STOP C] was pressed (audio CD) or from beginning of the file where [STOP C] was pressed (JPEG). During program playback, press [STOP C] twice to display the program screen. To go back to the normal program playback, press [RETURN ] to exit from the program screen, then press [PLAY B]. To repeat the current track / file in the program, press [REPEAT] repeatedly until " Track" appears during playback. To repeat the entire program, press [REPEAT] repeatedly until " All" appears during playback. Playback from a desired track / file and random playback are not available during program playback. The program will be cleared when; - the unit is turned into the standby mode. (as for "Disc" mode, just opening the disc tray will clear the program info. This function is available only on discs recorded in the Dolby Digital format. Picture adjustment and audio language setting cannot be changed during this function. During this function, 2ch LPCM will be output from HDMI OUT jack and DIGITAL OUT jack. Track / File list : Track / File list in the original order will be displayed. operation guide : Press [RED] to go to the previous page in the track / file list. 2 Use [K / L] to select your desired item, then During the random playback, press [STOP C] once to set the resume point, and then press [PLAY B] to resume random playback from where [STOP C] was pressed (audio CD) or from beginning of the file where [STOP C] was pressed (JPEG). To repeat the current track / file in the random selection, press [REPEAT] repeatedly until " Track" appears during playback. To repeat the entire random selection press [REPEAT] repeatedly until " All" appears during playback. Playback from a desired track / file is not available during random playback. You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. "1" : Executes 3D noise reduction which detects and deletes the noise by comparing each picture frames. "2" : Executes MPEG noise reduction which reduces the block noise and mosquito noise on the subtitle on movie. "3" : Executes both MPEG noise reduction and 3D noise reduction. Some BD-video have the PIP function which enables you to display the secondary video in the primary video. [. . . ] The rate which sound is measured by a specified interval to turn into digital audio data. If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every time you change the audio or subtitle language setting on page 29. If you choose any other languages, "---" will be displayed instead. The specifications and design of this product are subject to change without notice. [. . . ]