User manual SYLVANIA LC370SS9

[. . . ] The model and serial numbers of this unit may be found on the cabinet. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the apparatus's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. Display the picture with its center at the original size and the edges stretched horizontally. Display a picture that is stretched out of proportion to fill the screen. This section describes the overview of the main menu displayed when you press [SETUP]. , between antenna and CATV) or if you move the unit to a different area after the initial setup, or if you restore the DTV channel you deleted, you will need to perform auto channel scan. You can skip the undesired channels when selecting the channels using [CH K/L]. You can add the channels that were not scanned by the auto channel scan. You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. You can select the sound input for the HDMI1 input jack if your unit is connected to an HDMI or DVI device. ) LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. Use [Cursor K / L] to select "Autoscan", then press [ENTER]. Use [Cursor K / L] to select an appropriate option, then press [ENTER]. Back Air Cable Cable 1 hour When the scanning and memorizing are completed, the lowest memorized channel will be displayed. The channels selected here can be skipped when selecting the channels using [CH K / L ]. After setting "Auto Channel Scan", using [CH K/L] on the remote control skips unavailable programs automatically. If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. â· Channel settings will be saved even if the power fails. â· Even if "Autoscan" is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [POWER]. Use [Cursor K / L] to select "Channel List", then press [ENTER]. The selected channel darkens in the channel list, and it skips when selecting the channels by using [CH K / L]. The registered channels will be gray in the channel list, and you can select those channels by using [CH K / L] again. â· When you skip a major channel, its minor channels are skipped as well. [. . . ] This allows the viewers to experience picture colors as original as it is. HDMI (high-definition multimedia interface) Interface that supports all uncompressed, digital audio/video formats including set-top box, BD / DVD player or digital television, over a single cable. sDTV (standard definition TV) Standard digital format that is similar to the NTSC picture quality. S-video Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through separate cables. [. . . ]