User manual SYLVANIA LC370SS8

[. . . ] INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING 37" Digital / Analog LCD TV Owner's Manual LC370SS8 TROUBLESHOOTING INFORMATION HIGH-DEFINITION TELEVISION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www. SylvaniaConsumerElectronics. com INTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The important note is located on the rear of the cabinet. Important Safeguards 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. [. . . ] · The volume bar display will automatically disappear in a few seconds. Press [MUTE] to turn off and on the sound. DTV Mute - When selecting digital channel 12-1 Be sure to press [­] before entering the minor channel number. · "Mute" is displayed on the TV screen for a few seconds. X / Y] to recover the original volume. · Press [CH RETURN] to return to the previously viewed channel. About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network. NTSC (analog mode) [Air Time] 18:00 18:30 CH4 (high definition TV) CH4 19:00 CH4 19:30 CH4 20:00 20:30 CH4 CH4-1 CH4-2 No signal CH4-2 ATSC (digital mode) CH4 No signal No signal CH4-1 No signal major channel : change automatically : change manually by using [CH K / L] minor channel Note: · "No Signal" will appear on the TV screen after the minor channel broadcast is over. 16 EN INTRODUCTION Still Mode You can freeze the image shown on the TV screen. Switching Each Mode You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes. TV/DTV channel Video1 CONNECTION Press [STILL] to pause the image shown on the screen. Still · The sound output will not be paused. · If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted. To cancel still mode, press any button except [POWER]. or INITIAL SETTING Video2 Component1 Component2 HDMI1 WATCHING TV HDMI2 PC · Pressing [CH L] reverses the direction of the mode. · To use the video or S-video input jack of VIDEO 1 on the unit, select "Video1". · To use the video or S-video input jack of VIDEO 2 on the unit, select "Video2". · To use the component video input jack of COMPONENT 1 on the unit, select "Component1". · To use the component video input jack of COMPONENT 2 on the unit, select "Component2". · To use the HDMI 1-IN jack on the unit, select "HDMI1". · To use the HDMI 2-IN jack on the unit, select "HDMI2". · To use the PC-IN jack on the unit, select "PC". 17 EN OPTIONAL SETTING TROUBLESHOOTING INFORMATION WATCHING TV Switching Audio Mode This section describes how to switch the audio language. TV DTV 1 Press [AUDIO] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. 6 SAP / STEREO 1 Press [AUDIO] to display the currently selected 6-1 English 1/3 language and the number of available languages. 2 Press [AUDIO] repeatedly to cycle through the When all audio are available available audio languages. SAP / STEREO SAP / MONO English 1/3 Spanish 2/3 SAP / STEREO When stereo and monaural audio are available MONO / STEREO MONO / STEREO Other 3/3 · Available languages differ depending on the broadcast. "Other" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. · The current mode will automatically disappear in 4 seconds. When SAP and monaural audio are available SAP / MONO SAP / MONO When only monaural audio is available MONO (Cannot be switched) Note: STEREO SAP MONO : Outputs stereo-audio : Outputs second audio program : Outputs mono-audio · Pressing [AUDIO] does not control external audio device. · The current mode will automatically disappear in 4 seconds. 18 EN INTRODUCTION Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. TV DTV In the analog mode, the current channel number and the audio mode are displayed. Press [INFO]. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Press [INFO] to display the details of the currently selected program. CONNECTION 6 SAP / STEREO 480i 480i SD SD 4:3 TV-PG DLSV CC CC INITIAL SETTING · The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV rating are displayed at the top-right corner of the TV screen. You can also press [BACK]. [Broadcasting Information] · The following information is displayed. [. . . ] If the infrared light appears through the camera, the remote control is working. 37 EN INFORMATION INFORMATION Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. The following is a chart of common cable channel designations. 5A 1 CATV channel I TV Display 22 CATV channel W+7 TV Display 43 CATV channel W+28 TV Display 64 CATV channel W+49 TV Display 85 CATV channel W+65 TV Display 106 CATV channel W+86 TV Display 127 CATV channel TV Display 2 2 J 23 W+8 44 W+29 65 W+50 86 W+66 107 W+87 128 3 3 K 24 W+9 45 W+30 66 W+51 87 W+67 108 W+88 129 4 4 L 25 W+10 46 W+31 67 W+52 88 W+68 109 W+89 130 5 5 M 26 W+11 47 W+32 68 W+53 89 W+69 110 W+90 131 6 6 N 27 W+12 48 W+33 69 W+54 90 W+70 111 W+91 132 7 7 O 28 W+13 49 W+34 70 W+55 91 W+71 112 W+92 133 8 8 P 29 W+14 50 W+35 71 W+56 92 W+72 113 W+93 134 9 9 Q 30 W+15 51 W+36 72 W+57 93 W+73 114 W+94 135 10 10 R 31 W+16 52 W+37 73 W+58 94 W+74 115 11 11 S 32 W+17 53 W+38 74 A-5 95 W+75 116 12 12 T 33 W+18 54 W+39 75 A-4 96 W+76 117 13 13 U 34 W+19 55 W+40 76 A-3 97 W+77 118 A 14 V 35 W+20 56 W+41 77 A-2 98 W+78 119 B 15 W 36 W+21 57 W+42 78 A-1 99 W+79 120 C 16 W+1 37 W+22 58 W+43 79 W+59 100 W+80 121 D 17 W+2 38 W+23 59 W+44 80 W+60 101 W+81 122 E 18 W+3 39 W+24 60 W+45 81 W+61 102 W+82 123 F 19 W+4 40 W+25 61 W+46 82 W+62 103 W+83 124 G 20 W+5 41 W+26 62 W+47 83 W+63 104 W+84 125 H 21 W+6 42 W+27 63 W+48 84 W+64 105 W+85 126 General Specifications TV format: ATSC / NTSC-M TV standard Closed caption system: §15. 122/FCC (digital CC) §15. 119/FCC (analog CC) Channel coverage (ATSC/NTSC): Terrestrial VHF: 2~13 UHF: 14~69 CATV 2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A-1, 5A Tuning system: Channel frequency synthesized tuning system Channel access: Direct access keyboard, Programmable scan, and up/down Terminals: Antenna input: VHF/UHF/CATV 75 unbalanced (F-type) S-video input: Mini DIN 4-pin jack x 2 Y: 1Vp-p (75) C: 286mVp-p (75) Video input: RCA jack x 2 1Vp-p (75) Audio input: RCA jack (L/R) x 10 2V rms (input impedance: more than 22k) Component video input: RCA jack x 6 Y: 1Vp-p (75) Pb: 700mVp-p (75) Pr: 700mVp-p (75) HDMI input: HDMI 19pin x 2 PC input: D-Sub 15pin x 1 (RGB) Mini jack ø3. 5mm x 1 (audio) Coaxial digital audio output: RCA jack x1 500mVp-p (75) Analog audio output: RCA jack x2 Electrical Specification Sound output: 10W, 8 x 2 Other Specifications Remote control: Digital encoded infrared light system Operating temperature: 41°F (5°C) to 104°F (40°C) Power requirements: 120V AC +/- 10%, 60Hz +/- 0. 5% Power consumption (maximum): 220W LCD: 37 inches wide XGA panel Dimensions: <Without stand> W: 37. 5 inches (950mm) H: 26. 5 inches (672. 5mm) D: 5. 0 inches (126. 5mm) <With stand> W: 37. 5 inches (950mm) H: 28. 1 inches (713mm) D: 11. 5 inches (290mm) Weight: 45. 5 lbs. (20. 6kg) · Designs and specifications are subject to change without notice and without our legal obligation. [. . . ]