User manual SYLVANIA LC320SLX

[. . . ] The model and serial numbers of this unit may be found on the cabinet. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the apparatus's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. Display the picture with its center at the original size and the edges stretched horizontally to fill the screen. Display a picture that is stretched out of proportion to fill the screen. This section describes the overview of the main menu displayed when you press [SETUP]. , between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform autoscan. Before you begin: Make sure the unit is connected to antenna or cable. You can skip the undesired channels when selecting the channels using [CH K / L]. You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. When you adjust the desired "PICTURE" and "SOUND" mode, you must switch the setting from "Retail" to "Home". You can confirm the version of the software currently used in this unit. LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. Use [Cursor K / L] to select "Autoscan", then press [ENTER]. Use [Cursor K / L] to select an appropriate option, then press [ENTER]. Now the system is scanning for Channels, please wait Autoscan will take up to 20 minutes to complete. When the scanning and memorizing are completed, the lowest memorized channel will be displayed. After setting "Autoscan", using [CH K / L] on the remote control skips unavailable programs automatically. If you press [POWER] or [SETUP] during autoscan, the setting will be canceled. Even if "Autoscan" is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [POWER]. If you want to change your PIN Code, follow the instruction of "New PIN Code". The channels selected here can be skipped when selecting the channels using [CH K / L]. [. . . ] Should your unit become inoperative, do not try to correct the problem yourself. Turn off the unit, unplug the AC power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center. Cable companies often designate channels with letters or letter-number combinations. Designs and specifications are subject to change without notice and without our legal obligation. [. . . ]