User manual SYLVANIA LC200SL9

[. . . ] READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. [. . . ] With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost. You can choose English, Spanish, or French as your on-screen language. The mute function, which turns the sound off and on, is also described. The volume bar will be displayed at the bottom of the TV screen when adjusting the volume. About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network. K/L] Although, you cannot watch the high definition TV (HDTV) program, the unit converts the HDTV signal down to the standard definition TV signal. You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. While receiving an MTS broadcast, press [AUDIO] repeatedly to cycle through the available audio channel. To use the video or S-video input jack on the unit, select "VIDEO1". To use the component video input jack on the unit, select "VIDEO2". When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. "OTHER" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. You can display the currently selected channel or other information such as the audio mode on the TV screen. The current channel number is displayed at the topright corner of the TV screen. 1 channel number 2 broadcast station 3 program title 4 audio language (Refer to "Switching Audio Mode" on page 15. KABC CH 95-03 A Day of Memories ENGLISH 1/3 A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. When the program guide consists of more than 6 lines, use [Cursor K/ L] to scroll. "No description provided" is displayed when the program guide is not provided. While the program guide is displayed, the closed caption function is interrupted. The information display will automatically disappear in a few seconds when the closed caption is on. [. . . ] If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working. [. . . ]